This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Silicone Rubber 1000 psi (6.89 MPa) Minimum Tensile Strength 45 - 55 Durometer
- Aerospace Material Specification
Published March 12, 2015 by SAE International in United States
Downloadable datasets availableAnnotation ability available
This specification covers a silicone rubber material that can be used to manufacture product in the form of sheet, strip, tubing, molded shapes, and extrusions.
This specification should not be used to address products such as O-rings, compression seals, O-ring cord, and molded-in-place gaskets.For these applications AMS specifications in the AMS7XXX series should be used.
AMS3345 Specification was updated for the five year review.
|Aerospace Material Specification||Elastomer: Phenyl Methyl Vinyl Silicone (PVMQ) Low Temperature/Engine Oil Resistant High Strength/High Tear 55 to 65 Type “A” Hardness For Products in Aircraft Piston Engine Oil/Low Temperature Environments|
|Aerospace Material Specification||ELASTOMER: FLUOROSILICONE RUBBER (FVMQ) FUEL AND OIL RESISTANT, HIGH STRENGTH 45 – 55 SHORE A HARDNESS FOR PRODUCTS IN FUEL SYSTEMS / LUBRICATING OILS|
|Aerospace Material Specification||Synthetic Rubber Low-Temperature Resistant 45-55|
Data Sets - Support Documents
|Unnamed Dataset 1|
|Unnamed Dataset 2|
|Table 2||Acceptance tests|
Welcome to the AMS-CE Elastomers Committee Discussion Forum.The AMS-CE Elastomers Committee maintains Aerospace Materials Specifications (AMS), Aerospace Recommended Practices (ARP), Aerospace Information Reports (AIR) and Aerospace Standards (AS) on elastomeric materials. AMS-CE, which reports to the Aerospace Materials Division, coordinates and maintains liaison with industry, government and other standardization groups on elastomeric materials. A significant part of this committee is concerned with elastomeric fluid sealing materials, their applications, material development, testing, quality, design parameters and design practices. No copyrighted material may be posted in this forum. SAE is not liable for opinions expressed or information posted to this forum. All information posted becomes the property of SAE.
|AMS2279||TOLERANCES Rubber Products|
|AMS2810||IDENTIFICATION OF NATURAL AND SYNTHETIC RUBBER MATERIALS|
|ASTMD2137||This document is not part of the subscrption.|
|ASTMD2240||This document is not part of the subscrption.|
|ASTMD297||This document is not part of the subscrption.|
|ASTMD3182||This document is not part of the subscrption.|
|ASTMD395||This document is not part of the subscrption.|
|ASTMD412||This document is not part of the subscrption.|
|ASTMD471||This document is not part of the subscrption.|
|ASTMD573||This document is not part of the subscrption.|
|ASTMD624||This document is not part of the subscrption.|
* Redlines comparisons are available for those standards listed in the Revision History that contain a radio button. A redline comparison of the current version against a revision is accomplished by selecting the radio button next to the standard and then selecting 'compare'. At this time, Redline versions only exist for some AMS standards. SAE will continue to add redline versioning with ongoing updates to SAE MOBILUS.