This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Automated Gaseous Nitriding Controlled by Nitriding Potential
- Aerospace Material Specification
- AMS2759/10
- Issued
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
This specification establishes requirements and procedures for generating nitrided surfaces on steel parts using a process controlled by the nitriding potential. See definition of compound layer in 8.1.1.
Recommended Content
| Aerospace Material Specification | Steel, Bars, and Forgings 3.5Cr - 9.5Ni - 18Co - 1.1Mo (0.13 - 0.17C) Double Vacuum Melted, Normalized, Annealed |
| Aerospace Material Specification | Gaseous Nitrocarburizing |
| Aerospace Material Specification | Steel Bars 0.95Cr - 0.20Mo (0.28 to 0.33C) (SAE 4130) Hardened and Tempered, 125 Ksi (862 MPa) Tensile Strength |
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| [Unnamed Dataset 1] | ||
| [Unnamed Dataset 2] | ||
| TABLE 1 | Minimum Surface Hardness | |
| TABLE 2 | Minimum Case Hardness | |
| TABLE 3 | Recommended Ranges of Nitriding Potential |
Issuing Committee
AMS B Finishes Processes and Fluids Committee
The committee of Finishes, Processes, and Fluids, AMS Committee B, shall prepare, coordinate, and revise documents related to processing technology, such as plating, brazing, coatings and compounds, through the participation of process suppliers, users, and interested government agencies. Committee activities shall provide a forum for the cooperative interchange of ideas and experience of the participants, resulting in the publication of specifications that embody sound, established aerospace industry practices and requirements to serve the suppliers and customers of aerospace processes.
Reference
| Number | Title |
|---|---|
| AMS2418J | Plating, Copper |
| AMS2418E | Plating, Copper |
| AMS2429E | Plating, Bronze Nitriding Stop-off 90Cu - 10Sn |
| AMS2750F | Pyrometry |
| AMS2759G | Heat Treatment of Steel Parts General Requirements |
| ANSIB46.1 | This document is not part of the subscrption. |
| ARP1820B | Chord Method of Evaluating Surface Microstructural Characteristics |
| ASTME140 | This document is not part of the subscrption. |
| ASTME18 | This document is not part of the subscrption. |
| ASTME384 | This document is not part of the subscrption. |
| ASTME92 | This document is not part of the subscrption. |
* Redlines comparisons are available for those standards listed in the Revision History that contain a radio button. A redline comparison of the current version against a revision is accomplished by selecting the radio button next to the standard and then selecting 'compare'. At this time, Redline versions only exist for some AMS standards. SAE will continue to add redline versioning with ongoing updates to SAE MOBILUS.