This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Adapter - Port Connection, Ring Locked Installation and Removal of
- Aerospace Standard
- MA2114B
- Revised
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
This SAE Aerospace Standard provides the essential minimum design, installation and removal standard for MA2111, MA2112, MA2113, and MA2119 adapters, and is applicable when specified on engineering drawings or in procurement documents.
Rationale
Add applicability to MA2119, including addition of Table 1B with associated dimensions and O-ring sizes and installation instructions. Correction of Figures 1 and 3 references. Add user definition requirement if torque values desired are other than those listed in Table 2B. Addition of alternate tooling numbers in Table 2B and addition of individual wrench and drive tool part numbers. Add alternate tool suppliers. Update 5.2.4 to recognize use of other sealants/primers and discourage use of Zinc Chromate primer. Update 5.2.5 for installation torque limits.
AECMA interest: Future revisions of this standard shall be coordinated with AECM C-4.
Recommended Content
| Aerospace Standard | Adapters - Port Connection, Ring Locked Design, Installation and Removal of |
| Aerospace Standard | Adapter Reducer, Beam Seal - Port Connection, Ring Locked Design, Installation and Removal of |
| Aerospace Standard | LIGHT ASSEMBLY, COCKPIT, FIXED |
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| Table 1A | Dimensions, MA2111, MA2112, MA2113 | |
| Table 1B | Dimensions, MA2119 | |
| Table 2A | Installation tooling | |
| Table 2B | Installation and removal tooling | |
| Table 3 | Axial load and boss Fsu minimum |
Issuing Committee
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
This Committee is responsible for developing and maintaining standards for design, test, and procurement of fluid systems part standards to improve reliability and economy. Their primary focus is on AS standards development and support of military standards. The Committee also develops ISO standards in a Subcommittee Advisory Group (SCAG) to ISO/TC 20/SC 10, and SAE-MA derivatives thereof.
Structure: SAE G-3 -- Parent committee SAE G-3A -- Aerospace Couplings Subcommittee SAE G-3B -- Aerospace Fittings Subcommittee SAE G-3D -- Aerospace Hose Subcommittee SAE G-3E - Aerospace Tubing Assemblies Subcommittee U.S. SCAG to ISO/TC 20/SC 10 -- ISO standards Major projects: Support of Military Standards Reform Support of military standard conversions to MIL-PERF and MIL-DTL. Development of AS replacements for military standards designated for conversion. Establish document to list G-3 accepted replacements for replaced part standards and military back-up specifications. Development of PRI QML/QPL Development of Performance Review Institute (PRI) process for approval and surveillance of manufacturers (Qualified Manufacturer List, QML) and for approval of standard parts as qualified for use (Qualified Parts List, QPL). Development of ISO Standards, Imperial Units ISO/TC 20/SC 10 standards have typically been developed in SI units. The ISO has approved development of inch-based ISO standards to support commercial aviation. Basic design, test, and procurement specifications will be selected from military standards that are to be converted to Non-Government standard (NGS) and developed as ISO standards.Reference
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.