This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
PLUG, PORT – MJ THREAD, O-RING SEAL, AMS-5640, METRIC
- Aerospace Standard
- MA2039A
- Reaffirmed
Downloadable datasets available
This content contains a 2D/3D
configurator
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Rationale
MA2039A HAS BEEN REAFFIRMED TO COMPLY WITH THE SAE FIVE-YEAR REVIEW POLICY.
-
1
MATERIAL: CORROSION AND HEAT RESISTANT STEEL, AMS-5640 (UNS S30310).
-
2
PROCUREMENT SPECIFICATION: MA2005
-
3
SURFACE TEXTURE: SYMBOLS PER ANSI Y14.36–1978. REQUIREMENTS PER ANSI/ASME B46.1–1985. UNLESS OTHERWISE SPECIFIED SURFACES TO BE 3.2 μm Ra.
-
4
BREAK EDGES 0.1–0.4 UNLESS OTHERWISE SPECIFIED.
-
5
DIMENSIONING AND TOLERANCING: ANSI Y14.5M–1982.
-
6
DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE SPECIFIED.
-
7
FITTING END IS IN ACCORDANCE WITH MA2093.
-
8
DO NOT USE UNASSIGNED PART NUMBERS.
-
Ⓐ ENTIRE STANDARD REVISED
-
AS, MA, AND AMS ARE SAE PUBLICATIONS.
-
ANSI IS AMERICAN NATIONAL STANDARDS INSTITUTE PUBLICATION.
Recommended Content
Aerospace Standard | BOSS-FLUID CONNECTION, INTERNAL STRAIGHT THREAD, SHALLOW TAP |
Aerospace Standard | BOLT, CLUSTER FITTING, SINGLE PORT FLARELESS |
Aerospace Standard | BOLT, CLUSTER FITTING, SINGLE PORT THROUGH, FLARELESS |
2D/3D Drawings
Some older browsers could require a plugin
install for 3D and or 2D previewer.
Data Sets - Support Documents
Title | Description | Download |
---|---|---|
TABLE 1 | Dimensions |
Issuing Committee
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
This Committee is responsible for developing and maintaining standards for design, test, and procurement of fluid systems part standards to improve reliability and economy. Their primary focus is on AS standards development and support of military standards. The Committee also develops ISO standards in a Subcommittee Advisory Group (SCAG) to ISO/TC 20/SC 10, and SAE-MA derivatives thereof.
Structure: SAE G-3 -- Parent committee SAE G-3A -- Aerospace Couplings Subcommittee SAE G-3B -- Aerospace Fittings Subcommittee SAE G-3D -- Aerospace Hose Subcommittee SAE G-3E - Aerospace Tubing Assemblies Subcommittee U.S. SCAG to ISO/TC 20/SC 10 -- ISO standards Major projects: Support of Military Standards Reform Support of military standard conversions to MIL-PERF and MIL-DTL. Development of AS replacements for military standards designated for conversion. Establish document to list G-3 accepted replacements for replaced part standards and military back-up specifications. Development of PRI QML/QPL Development of Performance Review Institute (PRI) process for approval and surveillance of manufacturers (Qualified Manufacturer List, QML) and for approval of standard parts as qualified for use (Qualified Parts List, QPL). Development of ISO Standards, Imperial Units ISO/TC 20/SC 10 standards have typically been developed in SI units. The ISO has approved development of inch-based ISO standards to support commercial aviation. Basic design, test, and procurement specifications will be selected from military standards that are to be converted to Non-Government standard (NGS) and developed as ISO standards.Reference
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.