This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Bolts, Screws, and Nuts - External Wrenching, Metric Threads - Design Parameters for
- Aerospace Standard
- MA1518C
- Stabilized
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
To fully define the following requirements for bolts with spline and hexagon heads of strength class up to but not including 1250 MPa:
-
a
Head dimensions (see 3.1)
-
b
Shank dimensions (see 3.2)
-
c
Geometric control (see 3.3)
-
d
Surface texture (see 3.4)
This document is based on one class of thread after all processing, including coating or plating, has been completed as follows: tolerance class 4h6h.
For particulars of thread, see AS1370. For thread runout and lead threads, see AS3062.
To fully define the following requirements for nuts with spline, plain hexagon and castellated configurations of strength class up to and including 1100 MPa:
-
a
Nut dimensions (see 4.1)
-
b
Geometric control (see 4.2)
-
c
Surface texture (see 4.3)
For particulars of threads, see AS1370.
This document is based on the following classes of internal threads after all processing, including coating or plating, has been completed:
-
Tolerance class 4H6H for sizes up to and including 5 mm
-
Tolerance class 4H5H for size 6 mm and larger
For particulars of thread, see AS1370.
Rationale
This document has been determined to contain basic and stable technology which is not dynamic in nature.
Recommended Content
| Technical Paper | Behavioral Systems Management of Confined Microsocieties: An Agenda for Research and Applications |
| Technical Paper | Successful Valve Train Rebuilding |
| Aerospace Material Specification | Sheet and Plate, Magnesium Alloy, 2.0Th - 0.78Mn (HM21A - T8), Solution Heat Treated, Cold Worked, and Precipitation Heat Treated |
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| Unnamed Dataset 2 | ||
| TABLE 1 | ||
| TABLE 2 | ||
| Unnamed Dataset 5 | ||
| TABLE 3 | ||
| TABLE 4 | ||
| TABLE 5 | ||
| TABLE 6 | Straightness of Shank and Thread | |
| TABLE 7 | ||
| TABLE 8 | ||
| TABLE 9 | ||
| TABLE 10 | ||
| TABLE 11 |
Issuing Committee
E-25 General Standards for Aerospace and Propulsion Systems
The SAE E-25 General Standards for Aerospace & Propulsion Systems committee addresses aerospace propulsion systems and components. These systems and components include bolts, screws, nuts, washers, studs, rivets, pins, covers, O-rings, brackets, plugs and associated procurement requirements, as well as solid film lubricants and design specifications for screw threads and fastener assembly requirements.
Reference
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.