This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Push-On Hose and Mating Hose Fittings
- Ground Vehicle Standard
- J2552_201406
- Stabilized
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
SAE J2552 provides limited, dimensional and general performance requirements for low pressure, field attachable, push-on hose and their mating hose fittings. The intended application is for fluid and pneumatic power used with petroleum base hydraulic fluids, lube oils, water glycols and air, within the temperature ranges listed in Table 1. The maximum working pressure is 1.7 MPa (see Table 2). For air applications the maximum working pressure is at 0.7 MPa.
Hose and hose fittings are manufactured within certain dimensions with tolerance ranges in order to provide the proper gripping and sealing. SAE J2552 hose from one manufacturer may not be compatible with SAE J2552 hose fittings supplied by another manufacturer. It is the responsibility of the fabricator to always follow the manufacturers’ instructions for proper preparation and fabrication of hose assemblies. The fabricator shall consult the manufacturers’ written assembly instructions or the manufacturers directly before intermixing hose and hose fittings from two manufacturers.
Hose assemblies made to this standard shall not be used in dynamic motion, vibrating or impulsing applications, nor for brake hoses or fuel lines.
Rationale
The technical report covers technology, products, or processes which are mature and not likely to change in the foreseeable future.
Recommended Content
| Ground Vehicle Standard | Defining Hydraulic Oil Compatibility with Hydraulic Hose Elastomers |
| Ground Vehicle Standard | Formed Tube Ends for Hose Connections and Hose Fittings |
Topic
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| TABLE 1 | WORKING TEMPERATURE RANGES | |
| Unnamed Dataset 2 | ||
| Unnamed Dataset 3 | ||
| Unnamed Dataset 4 | ||
| Unnamed Dataset 5 | ||
| Unnamed Dataset 6 | ||
| TABLE 2 | DIMENSIONS AND SPECIFICATIONS FOR SAE PUSH-ON HOSE | |
| TABLE 3 | HOSE CONCENTRICITY | |
| Unnamed Dataset 9 | ||
| TABLE 4 | DIMENSIONS OF MALE PIPE THREAD PUSH-ON HOSE FITTING ( ) | |
| TABLE 5 | DIMENSIONS OF SWIVEL MALE PIPE THREAD PUSH-ON HOSE FITTING ( ) | |
| TABLE 6 | DIMENSIONS OF FEMALE PIPE THREAD PUSH-ON HOSE FITTING ( ) | |
| TABLE 7 | DIMENSIONS OF SWIVEL FEMALE PIPE THREAD PUSH-ON HOSE FITTING ( ) | |
| TABLE 8 | DIMENSIONS OF MALE 37 DEGREE FLARED PUSH-ON HOSE FITTING ( ) | |
| TABLE 9 | DIMENSIONS OF FEMALE SWIVEL 37 DEGREE FLARED PUSH-ON HOSE FITTING ( ) | |
| TABLE 10 | DIMENSIONS OF FEMALE SWIVEL 37 DEGREE FLARED 45 DEGREE ELBOW PUSH-ON HOSE FITTING ( ) | |
| TABLE 11 | DIMENSIONS OF FEMALE SWIVEL 37 DEGREE FLARED 90 DEGREE ELBOW PUSH-ON HOSE FITTING ( ) | |
| TABLE 12 | DIMENSIONS OF FEMALE SWIVEL 37 DEGREE FLARED 90 DEGREE ELBOW LONG DROP PUSH-ON HOSE FITTING ( ) | |
| TABLE 13 | MALE 45 DEGREE FLARED PUSH-ON HOSE FITTING ( ) | |
| TABLE 14 | DIMENSIONS OF FEMALE SWIVEL 45 DEGREE FLARED PUSH-ON HOSE FITTING ( ) | |
| TABLE 15 | DIMENSIONS OF FEMALE 45 DEGREE INVERTED FLARE PUSH-ON HOSE FITTING ( ) | |
| TABLE 16 | DIMENSIONS OF MALE SWIVEL 45 DEGREE INVERTED FLARE PUSH-ON HOSE FITTING ( ) | |
| TABLE 17 | DIMENSIONS OF PUSH-ON SPLICER HOSE FITTING ( ) | |
| TABLE 18 | DIMENSIONS OF MALE STANDPIPE PUSH-ON HOSE FITTING ( ) |
Issuing Committee
Hydraulic Hose and Hose Fittings Committee
The Hydraulic Hose and Hose Fittings Subcommittee of the FCCTC develops and maintains SAE Standards, Recommended Practices and Information Reports relating to hydraulic hose and hose fittings with an intended use in pressure applications. Participants in the FCCTC Hydraulic Hose and Hose Fittings Subcommittee include OEMs, suppliers, consulting firms, government and other interested parties.
Reference
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.