This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Performance Requirements for SAE J844 Nonmetallic Air Brake Tubing and Push to Connect Fitting Assemblies Used in Vehicular Air Brake Systems
- Ground Vehicle Standard
- J2494/3_201902
- Revised
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
This SAE Standard is intended to establish uniform performance criteria and methods of testing push-to-connect tube fittings, with SAE J844 air brake tubing as used in vehicular air brake systems.
The specific tests and performance criteria applicable to the tubing are set forth in SAE J844. The test values contained in this performance standard are for test purposes only. For environmental and usage limitations, refer to SAE J844.
Rationale
The purpose of this specification revision is to modify the language/description of the oil used in the 3.7, which, as described in 3.7.1, “is intended to evaluate the effects of contaminated compressor oil as described in SAE J2024 Section 3 at high and low temperatures on fitting performance.” The contaminated oil mixture is currently specified in 3.7.4, as “consisting of 11 parts SAE 15W40CD type oil and one part SOFTC-2A contaminates.” Since API oil service requirements are constantly being reviewed and updated, as pointed out by others on the committee, it is inevitable that older grades, such as the SAE 15W40CD grade originally listed, will eventually become obsolete and/or unavailable. The recommended revision to the document is to change the oil description in 3.7.4 from “SAE 15W40CD” to “SAE 15W40 (current API Diesel C Service Category for four-stroke diesel engines, such as API CK4 current as of 2018),” so that most current and applicable oil grades that become standardized for service will be used for the oil mixture, keeping the test relevant for future vehicles. Note that the phrase “such as API CK4 current as of 2018” is added to further clarify what is the current (as of this revision) API service category, addressing an SAE first ballot comment.
Recommended Content
| Ground Vehicle Standard | Dimensional Specifications for Non-Metallic Body Push-to-Connect Fittings Used On a Vehicular Air Brake System |
| Ground Vehicle Standard | Performance Requirements for SAE J844 Nonmetallic Tubing and Fitting Assemblies Used in Automotive Air Brake Systems |
| Ground Vehicle Standard | Nonmetallic Air Brake System Tubing |
Topic
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| Unnamed Dataset 2 | ||
| Table 1 | Tensile requirements | |
| Table 2 | Air leakage test conditions | |
| Table 3 | Leakage test requirements | |
| Table 4 | Vibration test requirements | |
| Table 5 | Side load test requirements |
Issuing Committee
Air Brake Tubing and Tube Ftg Committee
The Air Brake Tubing and Tube Fittings Committee develops and maintains SAE Standards, Recommended Practices and Information Reports relating to tubing and fittings of air brake systems. Participants in the Air Brake Tubing and Tube Fittings Committee of the Truck and Bus Brake and Advanced Driver Assistance Systems Steering Committee includes OEMs, suppliers, consulting firms, government and other interested parties.
Reference
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.