This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Welded and Cold-Drawn, SAE 1021 Carbon Steel Tubing Normalized for Bending and Flaring
- Ground Vehicle Standard
- J2467_201506
- Revised
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
The SAE Standard covers normalized electric resistance welded, cold-drawn, single-wall, SAE 1021 carbon steel pressure tubing intended for use as pressure lines and in other applications requiring tubing of a quality suitable for bending, flaring, forming, and brazing.
The grade of material produced to this specification is higher in carbon content and manganese content than the grade of material specified in SAE J525 and is intended to service higher pressure applications than equivalent sizes of SAE J525. Due to the higher carbon and manganese content the forming characteristics of the finished tube are diminished versus the SAE J525 product. Special attention to the overall forming requirements of the finished assembly shall be taken into consideration when specifying material produced to this specification.
In an effort to standardize within a global marketplace and ensuring that companies can remain competitive in an international market it is the intent to convert to metric tube sizes which will:
-
Lead to one global system
-
Guide users to preferred system
-
Reduce complexity
-
Eliminate inventory duplications
Rationale
This five year review of the J2467 standard incorporates revisions requested by producers, fabricators and users of this material type. The updates include the following:
-
Revised documents listing,
-
Verbiage changes to improve the technical meanings of specific terms and expressions
-
Clarified wall thickness reduction requirement in section 3.0
-
Revised wording of section 5.2
-
Recommendation for the use of metric size materials.
-
Revision of chemical requirements to harmonize with SAE J403
-
Added notation to clarify test agreement noted on 8.8 Pressure Proof Test
-
Added notation to clarify test note on 8.9 Nondestructive Electronic Test
Recommended Content
| Aerospace Standard | “D” RING SEAL FOR SHOCK STRUTS MOLDED FROM MIL-P-25732 ACRYLONITRILE BUTADIENE (NBR) MATERIAL |
| Aerospace Standard | PACKING, PREFORMED, O-RING MOLDED FROM PERFLUOROETHER, FFO MATERIAL |
| Aerospace Standard | M83461 O-RING MOLDED FROM AMS-P-83461 RUBBER |
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| Unnamed Dataset 2 | ||
| Unnamed Dataset 3 | ||
| Unnamed Dataset 4 | ||
| Table 1 | Tubing diameter tolerances | |
| Table 2 | Tubing wall thickness tolerances | |
| Table 3 | Chemical requirements | |
| Table 4 | Mechanical properties |
Issuing Committee
The Metallic Tubing Subcommittee of the FCCTC develops and maintains SAE Standards, Recommended Practices and Information Reports relating to metallic tubing with an intended use in pressure applications. Participants in the FCCTC Metallic Tubing Subcommittee include OEMs, suppliers, consulting firms, government and other interested parties.
Reference
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.