This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Link Layer
- Ground Vehicle Standard
- J2366/2_200111
- Issued
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
This SAE Recommended Practice details the Link Layer of the Intelligent Transportation Systems (ITS) Data Bus, which is generally intended for in-vehicle use.
The ITS Data Bus (IDB) is a non-proprietary token passing bus, designed to allow disparate consumer, vehicle, and commercial electronic components to communicate and share information across a standard, open data bus. This first version of the IDB is called IDB-C.
This Recommended Practice describes the Link Layer of the IDB-C, as shown in Section 1. Below the Link Layer of the IDB-C is the CAN 2.0B Link Layer. The Physical Layer of the IDB-C incorporates the Physical Layer as specified by SAE J2366-1 and J2590.
The IDB-C Link Layer is logically divided into two functional sub-layers, viz., Logical Link Control (LLC) and Media Access Control (MAC). However, these are logical groupings that re-use some of the same bits within the CAN 2.0B frame for efficiency.
The MAC sub-layer handles all media access functions, such as virtual token handling, addressing, and notifications of IDB-C configuration changes to other MAC layers on the IDB-C.
The LLC sub-layer provides the mechanisms to send and receive point-to-point or broadcast frames to other LLC sub-layers on the IDB-C. In addition, the LLC provides an Alternate Transport Identifier (ATID) allowing more than one set of higher layer protocols to be used on a single Node.
Topic
Data Sets - Support Documents
Title | Description | Download |
---|---|---|
TABLE 1 | PHYSICAL NODE ID TRANSMISSION VALUES | |
TABLE 2 | TOKEN HOLD TIME MAXIMUMS | |
TABLE 3 | CAN ELEMENTS | |
TABLE 4 | MAC FRAME IDS DEFINED |
Issuing Committee
Reference
Number | Title |
---|---|
CAN Specification, Version 2.0B | This document is not part of the subscrption. |
CANSpecificatio | This document is not part of the subscrption. |
ISO7498:1990 | This document is not part of the subscrption. |
J2355 | This document is not part of the subscrption. |
J2366-1 | This document is not part of the subscrption. |
J2366-4 | This document is not part of the subscrption. |
J2366-7 | This document is not part of the subscrption. |
J2366/1 | This document is not part of the subscrption. |
J2366/4 | This document is not part of the subscrption. |
J2366/7 | This document is not part of the subscrption. |
J2590 | This document is not part of the subscrption. |
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.