This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Electroplating of Nickel and Chromium on Metal Parts - Automotive Ornamentation and Hardware
- Ground Vehicle Standard
- J207_201205
- Stabilized
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
This standard covers requirements for several types and grades of electrodeposited nickel/chromium coatings on ferrous or copper alloy basis metals and copper/nickel/chromium on zinc or aluminum alloys for the finishing and corrosion protection of decorative ornamentation and hardware of motor vehicles and marine controls and fittings. Four grades of coatings are provided to correlate with the service conditions under which each is expected to provide satisfactory performance, namely: very severe, severe, moderate, and mild. Definitions and typical examples of these service conditions are provided in Appendix A.1 Information contained in this document generally conforms to the information contained in ASTM B 456, Specification for Electrodeposited Coatings of Nickel plus Chromium.
Rationale
The Technical Committee which originally created this document no longer exists.
This was reviewed by two experts in the field and it has been determined to contain basic and stable technology which is not dynamic in nature. The contents of the document were deemed accurate and do not require an update prior to stabilization.
Recommended Content
Aerospace Material Specification | Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 6262 |
Aerospace Material Specification | Aluminum Alloy Seamless Drawn Round Tubing 2.3 Cu – 8.0 Zn – 2.0 Mg - 0.16 Zr (7155-T76) Solution Heat Treated and Aged |
Aerospace Material Specification | Copper-Beryllium Alloy, Bars and Rods 98Cu - 1.9Be Solution and Precipitation Heat Treated (TF00, formerly AT) |
Topic
Data Sets - Support Documents
Title | Description | Download |
---|---|---|
TABLE 1 | NICKEL/CHROMIUM COATINGS ON STEEL | |
TABLE 2 | COPPER/NICKEL/CHROMIUM COATINGS ON ZINC ALLOY | |
TABLE 3 | NICKEL/CHROMIUM COATINGS ON COPPER OR COPPER ALLOYS | |
TABLE 4 | COPPER/NICKEL/CHROMIUM COATINGS ON ALUMINUM | |
Unnamed Dataset 5 | ||
TABLE D1 |
Issuing Committee
Materials, Processes and Parts Council
The Materials, Processes, and Parts Council (MPPC) promotes, directs, supervises and provides for the development of consensus SAE Technical reports. The council also conducts investigations for activities related to engineered materials, processes and parts used in the surface mobility industry. Participants in the SAE Materials, Processed and Parts Council include OEMs, suppliers, consulting firms, government and other interested parties.
Reference
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.