Various SAE vehicle sound level measurement procedures require use of a sound level meter which meets the Type 1 or Type 2 requirements of ANSI S1.4-1983 (see 2.1.1.1), or an alternative system which can be proved to provide equivalent test data. The purpose of this SAE Recommended Practice is to provide a procedure for determining if a sound data acquisition system (SDAS) has electro-acoustical performance equivalent to such a meter. By assuring equivalent performance of the test instrumentation, the equivalence of test data is assured.
Two general configurations of sound data acquisition systems will be encompassed (see Figure 1). The first configuration consists of instrument sections which perform as a sound level meter. The second configuration is a system which records data for later processing. The intent of this document is to establish guidelines which permit the test engineer to insure equivalence of sound data acquisition systems to a sound level meter. It requires that the test engineer have a working knowledge of the characteristics of the sound data being measured.
The scope of the document includes the system performance requirements for the entire sound measurement system. It provides the methods needed to verify Type 1 or Type 2 instruments. However, it also provides a method to qualify an SDAS that does not meet the requirements in their entirety, but can be used provided knowledge of the test data is obtained and an iterative process is followed in qualifying the SDAS. The system need only be qualified for the dynamic characteristics and weighting mode in which it is to be used. The scope of this document does not include qualification of system components for harmonic distortion, tape recorder wow and flutter, etc. However, these factors must be considered when determining system performance, especially where spectral information is sought. The references in Section 2 should be consulted for general performance requirements and precautions regarding instrumentation for acoustical measurements.
Rationale
This document has been determined to contain basic and stable technology which is not dynamic in nature.
The Light Vehicle Exterior Sound Level Standards Committee is part of the Vehicle Engineering Sound Level Forum Committee that reports to the Vehicle Systems Group of the Motor Vehicle Council. The Committee is responsible for developing and maintaining SAE Standards, Recommended Practices, and Information Reports related to the measurement of sound levels in passenger cars and light trucks including pickups, vans and sport utility vehicles. While the sound measurement techniques have remained constant for a number of years, changes in the vehicle powertrain configurations require updates to ensure comparable operating methods for the variety of products. The committee has also undertaken the review and coordination of comments related to the procedures being developed by the International Organization for Standardization's (ISO) Working Group 42, Measurement of noise emission (external) from road vehicles. The committee will also review the technical validity of any governmental regulations promulgated by the United States or other countries where US products are being sold. Participants in the SAE Light Vehicle Exterior Sound Level Standards Committee include OEMs, suppliers, consulting firms, government, and other interested parties.
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.
View/Annotate
Content Loading, Please Wait
Document Preview
Content Loading, Please Wait
Document Comparison
Content Loading, Please Wait
Download
A list of downloadable items.
Product Code
Document Title
File Type
Download
J184_201408
Qualifying A Sound Data Acquisition System
Export Metadata
This modal will allow the user to download citation information or export specific fields of data into one of three file formats: Excel, comma-separated values, or text.
You are currently not logged into your Dashboard account, which is required for annotating.
Please select Login to login or register for the Dashboard. Select Continue to view the content without the ability to annotate.
Redline Warning
You are currently not logged into your Dashboard account, which is required for annotating.
Please select Login to login or register for the Dashboard. Select Continue to view the content without the ability to annotate.
Data Set Warning
Qualifying A Sound Data Acquisition System
SAE Journal Subscriptions are available in a variety of options, which include electronic, electronic with back file, and archive. For detailed information and options, please complete the following:
Content Request
Check My Access!
You may already have access to the Ground Vehicle Standard, Qualifying A Sound Data Acquisition System
Subscription Access
If you have Subscription Access with a username and password, please login below.
Institutional Login
If you have Institutional Access to SAE MOBILUS, using a predetermined organizational login utilizing single-sign-on (Shibboleth), please login below. To request institutional access to SAE MOBILUS, please complete the institutional subscription information form.
Purchase
If you do not have access to SAE MOBILUS via username/password or institutional access, you can still purchase the Ground Vehicle Standard, Qualifying A Sound Data Acquisition System.
Search Tips: Search Operators:AND, OR, NOT; Wild Cards; Using Quotes
SAE MOBILUS® Search Tips
Please note: All terms not contained within quotes, will be evaluated using the OR operator. This means that your search results will contain all results that contain ANY of the entered terms.
AND, OR, NOT
SAE MOBILUS supports the use of the AND, OR and NOT BOOLEAN operators ONLY function with the Advanced Search.
Wild Cards
Using the asterisk, ( * ) allows you to search for a partial word. For example, entering a keyword search of aero* will search for any word beginning with aero.
Using the question mark, ( ? ) allows you to search for a word with a single character wildcard. For example, searching for t?re would match both tire and tyre
Using Quotes
Words in double quotes " " are treated as a phrase. Conducting a search for "heat model" will return all results in which the exact phrase "heat model" is found, while "heat modeling" would NOT be included.
A term combined with a phrase will be joined with an OR operator.
Searching for Standards
When searching for a standard please use the entire Document Number assigned, which includes the abbreviation. A space can be used, or omitted between the abbreviation and number.