This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Formed Tube Ends for Hose Connections and Hose Fittings
- Ground Vehicle Standard
- J1231_201608
- Revised
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
This SAE Standard provides general and dimensional specifications for formed tube ends and hose fittings. These connections are intended for general applications in low pressure automotive and hydraulic systems on automotive, industrial, and commercial products. The fittings shown in Figures 2 and 3 are intended to be retained by hose clamps as specified in SAE J1508.
It is recommended that where step sizes or additional types of fittings are required, they be designed to conform with the specifications of this document insofar as they may apply. The following general specifications shall supplement the dimensional data contained in the tables with respect to all unspecified detail.
Rationale
General revision and update to SAE J1231 to correct Table 3.
-
Deleted “D” internal diameter dimensions in Table 3, for sizes -40 thorugh -80.
-
Added footnote 2 to Table 3.
Recommended Content
| Ground Vehicle Standard | Coding Systems for Identification of Fluid Conductors and Connectors |
| Ground Vehicle Standard | Hose Clamp Specifications |
Topic
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| Unnamed Dataset 2 | ||
| Unnamed Dataset 3 | ||
| Table 1 | Tolerances on drilled holes | |
| Table 2 | Dimensions of chamfers on external pipe threads | |
| Table 3 | Dimensions for beaded tube hose connections (reference ) | |
| Table 4a | Dimensions of male pipe thread hose connectors | |
| Table 4B | Dimensions of 90-degree and 45-degree male pipe hose fittings | |
| Table 4C | Dimensions of 90-degree and 45-degree long drop male hose fittings | |
| Table 5A | Dimensions of male SAE J1926-3 straight thread hose connectors | |
| Table 5B | Dimensions of 90-degree and 45-degree SAE J1926-3 straight thread hose fittings | |
| Table 5C | Dimensions 90-degree and 45-degree long drop SAE J1926-3 straight thread hose fittings |
Issuing Committee
Hydraulic Hose and Hose Fittings Committee
The Hydraulic Hose and Hose Fittings Subcommittee of the FCCTC develops and maintains SAE Standards, Recommended Practices and Information Reports relating to hydraulic hose and hose fittings with an intended use in pressure applications. Participants in the FCCTC Hydraulic Hose and Hose Fittings Subcommittee include OEMs, suppliers, consulting firms, government and other interested parties.
Reference
| Number | Title |
|---|---|
| ASMEB1.1 | This document is not part of the subscrption. |
| ASMEB1.20.1 | This document is not part of the subscrption. |
| ASTMB117 | This document is not part of the subscrption. |
| ISO4759-1 | This document is not part of the subscrption. |
| J1273_201409 | Recommended Practices for Hydraulic Hose Assemblies |
| J1508_202301 | This document is not part of the subscrption. |
| J1926-3 | This document is not part of the subscrption. |
| J1926/3_201609 | Connections for General Use and Fluid Power - Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 3: Light-Duty (L-Series) Stud Ends |
| J476 | This document is not part of the subscrption. |
| J476_201302 | Dryseal Pipe Threads |
| J514 | This document is not part of the subscrption. |
| J514_201201 | Hydraulic Tube Fittings |
| J516_201110 | Hydraulic Hose Fittings |
| J516_201604 | Hydraulic Hose Fittings |
| J846_201303 | Coding Systems for Identification of Fluid Conductors and Connectors |
| J846_201511 | Coding Systems for Identification of Fluid Conductors and Connectors |
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.