This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, FULL SHANK, STEEL AMS6322, CADMIUM PLATED, .3750-24 UNJF-3A
- Aerospace Standard
- AS9944A
- Revised
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Rationale
REVISED AND REDRAWN. CHANGES TO ALLOW OPTIONAL SHAPE AT BOTTOM OF LIGHTENING HOLE, ADD EXCEPTION TO EDGE DISTANCE REQUIREMENTS FOR HEAD MARKING, ADD DIMENSIONING AND TOLERANCING PER ANSI Y14.5M-1982, ADD BASIC DIM AND POSITION FOR SAFETY WIRE HOLES, UPDATE THREAD SPECIFICATION TO AS8879, UPDATE SURFACE FINISH REQUIREMENTS, ADD AS3062 FOR THREAD RUNOUT, ADD REQUIREMENT FOR SURFACE TEXTURE SYMBOLS, ADD MIN. BEARING FACE DIAMETER, UPDATE MAGNETIC PARTICLE INSPECTION REFERENCE, ADD CADMIUM PLATE NOTICE, ADD DATUMS, AND UPDATE FORMATS, TABLE, AND NOTES.
Recommended Content
| Aerospace Standard | BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, FULL SHANK, STEEL AMS6322, CADMIUM PLATED, .250-28 UNJF-3A |
| Aerospace Standard | BEARING, ROLLER, NEEDLE, SINGLE ROW, HEAVY DUTY, TYPE I, ANTIFRICTION, INCH |
| Aerospace Standard | BEARING, BALL, AIRFRAME, ANTI-FRICTION, HEAVY DUTY |
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| TABLE 1 | PART NUMBERS AND DIMENSIONS |
Issuing Committee
E-25 General Standards for Aerospace and Propulsion Systems
The SAE E-25 General Standards for Aerospace & Propulsion Systems committee addresses aerospace propulsion systems and components. These systems and components include bolts, screws, nuts, washers, studs, rivets, pins, covers, O-rings, brackets, plugs and associated procurement requirements, as well as solid film lubricants and design specifications for screw threads and fastener assembly requirements.
Reference
| Number | Title |
|---|---|
| AMS2400 | PLATING, CADMIUM |
| AMS6322 | STEEL .5 Ni .5 Cr .25 Mo (.38 - .43 C) |
| ANSIY14.5M | This document is not part of the subscrption. |
| AS7452 | Bolts and Screws, Steel, Low Alloy Heat Treated, Roll Threaded |
| ASMEB46.1 | This document is not part of the subscrption. |
| ASMEY14.36M | This document is not part of the subscrption. |
| ASTME1444 | This document is not part of the subscrption. |
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.