This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Bearings, Plain, Self-Aligning, All Metal General Specification for
- Aerospace Standard
Published February 08, 2012 by SAE International in United States
Downloadable datasets availableAnnotation ability available
This specification covers all metal plain spherical bearings which are self-aligning for use between 65 °F to 250 °F. This specification covers bearings with alloy steel races, aluminum bronze races, and an entierly CRES bearing (ball and race). All units are inches, unless otherwise stated.
AS8976 Rev A is a 5 year review and reformat of this specification. Clarified plating notes. Added option for zinc nickel plate. Clarified procurement activity address. Clairifed load test dwell times to be approximate. Updated obsolete specifications throughout document. Clarified no material / plating substitutions once qualified unless approved by qualifying activity.
|Aerospace Standard||Identification Marking Methods|
|Aerospace Standard||BEARING, PLAIN, ROD END, SELF-ALIGNING, SELF-LUBRICATING, NARROW, INTERNALLY THREADED, STEEL, CORROSION RESISTANT (CRES) −65 TO +325 °F|
Data Sets - Support Documents
|Unnamed Dataset 1|
|Unnamed Dataset 2|
|Unnamed Dataset 3|
|TABLE 1||RADIAL AND AXIAL STATIC LIMIT LOAD|
|TABLE 2||QUALIFICATION TEST SAMPLES|
|TABLE 3||QUALITY CONFORMANCE INSPECTIONS|
|TABLE 4||SAMPLING PLAN FOR QUALITY CONFORMANCE INSPECTIONS EXCEPT DESTRUCTIVE INSPECTIONS|
|Unnamed Dataset 8|
The objective of the Airframe Control Bearing Group (ACBG)is to provide industry experience and state of the art technology for airframe bearings, and issue as appropriate, published documents known as SAE Aerospace Standards. The focus of the Committees is present and future aircraft airframe control systems, bearings, and associated components.The ACBG shall be responsible for the preparation, development, maintenance and promotion of all relevant specifications, standards, and requirements for airframe bearings, control system components, and associated hardware used in the design and construction of aerospace mechanical systems and subsystems. The ACBG shall also coordinate with other organizations for lubricants, control cables, and locking devices and shall utilize and promote the use of specifications published by those organizations. The ACBG shall function as a forum for technology transfer as it affects the Airframe bearing and control systems industry and for the enhancement of distribution channels.
|AMS2417||NICKEL-ZINC ALLOY PLATING|
|AMSQQC320||Chromium Plating (Electrodeposited)|
|AMSQQP416||Plating, Cadmium (Electrodeposited)|
|ANSI/ASQZ1.4||This document is not part of the subscrption.|
|AS21154||BEARING, PLAIN, SELF-ALIGNING, GROOVED OUTER RING|
|AS21155||BEARING, PLAIN, SELF ALIGNING|
|AS21156||This document is not part of the subscrption.|
|ASMEB46.1||This document is not part of the subscrption.|
|ASMEY14.100||This document is not part of the subscrption.|
|ASMEY14.24||This document is not part of the subscrption.|
|ASMEY14.34||This document is not part of the subscrption.|
|ASMEY14.35M||This document is not part of the subscrption.|
|ASTME18||This document is not part of the subscrption.|
|MIL-DTL-197||This document is not part of the subscrption.|
|MIL-G-21164||This document is not part of the subscrption.|
|MIL-STD-129||This document is not part of the subscrption.|
* Redlines comparisons are available for those standards listed in the Revision History that contain a radio button. A redline comparison of the current version against a revision is accomplished by selecting the radio button next to the standard and then selecting 'compare'. At this time, Redline versions only exist for some AMS standards. SAE will continue to add redline versioning with ongoing updates to SAE MOBILUS.