This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
SCREW THREADS - UNJ PROFILE, INCH
- Aerospace Standard
- AS8879
- Issued
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
This SAE Aerospace Standard (AS) specifies the characteristics of the UNJ profile inch series of screw threads, to include a mandatory controlled radius of 0.18042P to 0.15011P at the root of the external thread and with the minor diameter of both external and internal threads increased to provide a basic thread height of 0.5625H in order to accommodate the external thread maximum root radius. The following detailed requirements are included:
-
a
UNJ basic profile and design profiles.
-
b
Standard series of diameter-pitch combinations for nominal thread diameters from .060 to 6.000 inches.
-
c
Standard thread classes and form tolerances.
-
d
Formulae for thread dimensions and tolerances.
-
e
Method of designating UNJ threads.
-
f
Inspection and verification requirements.
-
g
Tables for selected diameter-pitch combinations for aerospace screws, bolts, nuts, shaft and bearing retaining screw threads, fluid fittings, and other component thread sizes.
-
h
Tables for UNJ screw threads limiting dimensions and tolerances.
-
i
Symbols for UNJ thread dimensions and tolerances.
Recommended Content
Aerospace Standard | Screw Threads - UNJ Profile, Inch Controlled Radius Root with Increased Minor Diameter |
Aerospace Standard | Screw Threads, Metric Buttress - MJB Profile |
Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
TABLE 1 | Coarse Thread Series | |
TABLE 1 | (Continued) | |
TABLE 2 | Fine Thread Series | |
TABLE 3 | Extra Fine Thread Series | |
TABLE 4 | Eight Thread Series | |
TABLE 5 | Twelve Thread Series | |
TABLE 5 | (Continued) | |
TABLE 6 | Sixteen Thread Series | |
TABLE 6 | (Continued) | |
TABLE 7 | Basic Thread Data | |
TABLE 7 | (Continued) | |
TABLE 8 | Special Diameter-Pitch Computations | |
TABLE 9 | ||
TABLE 10 |
Issuing Committee
E-25 General Standards for Aerospace and Propulsion Systems
The SAE E-25 General Standards for Aerospace & Propulsion Systems committee addresses aerospace propulsion systems and components. These systems and components include bolts, screws, nuts, washers, studs, rivets, pins, covers, O-rings, brackets, plugs and associated procurement requirements, as well as solid film lubricants and design specifications for screw threads and fastener assembly requirements.
Reference
Number | Title |
---|---|
ANSI/ASME/B1.1 | This document is not part of the subscrption. |
ANSI/ASME/B1.2 | This document is not part of the subscrption. |
ANSI/ASME/B1.3M | This document is not part of the subscrption. |
ANSI/ASME/B1.7M | This document is not part of the subscrption. |
ANSI/ASME/B46.1 | This document is not part of the subscrption. |
FED-STD-H28/1 | This document is not part of the subscrption. |
FED-STD-H28/2 | This document is not part of the subscrption. |
FED-STD-H28/20 | This document is not part of the subscrption. |
FED-STD-H28/4 | This document is not part of the subscrption. |
FED-STD-H28/6 | This document is not part of the subscrption. |
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.