This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Lubricant, Cetyl Alcohol, 1-Hexadecanol, Application to Fasteners
- Aerospace Standard
- AS87132
- Reaffirmed
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
This specification establishes the requirements for flake or granular cetyl alcohol, solvents for dissolving the cetyl alcohol, preparation and application requirements for use of cetyl alcohol as an installation lubricant on mechanical fasteners, such as pins, bolts, nuts, washers, threaded or nonthreaded fastening devices, and inspection criteria for coated parts.
Rationale
AS87132 has been reaffirmed to comply with the SAE five-year review policy.
Recommended Content
| Aerospace Standard | BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES UNS S66286, 130 KSI MIN .1900-32 UNJF-3A |
| Aerospace Standard | Wrenches, Twelve Spline, Metric |
| Ground Vehicle Standard | Steel Stamped Nuts of One Pitch Thread Design - Inch Series |
Topic
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| Unnamed Dataset 2 | ||
| Unnamed Dataset 3 | ||
| TABLE 1 | PROPERTIES OF CETYL ALCOHOL | |
| TABLE 2 | PROPERTIES OF SOLVENTS | |
| TABLE 3A | PROPERTIES OF TYPE I AND TYPE II MIXED LUBRICANT SOLUTIONS | |
| TABLE 3B | PROPERTIES OF TYPE III MIXED LUBRICANT SOLUTIONS | |
| TABLE 4 | TEST METHODS FOR LUBRICANT PROPERTIES |
Issuing Committee
E-25 General Standards for Aerospace and Propulsion Systems
The SAE E-25 General Standards for Aerospace & Propulsion Systems committee addresses aerospace propulsion systems and components. These systems and components include bolts, screws, nuts, washers, studs, rivets, pins, covers, O-rings, brackets, plugs and associated procurement requirements, as well as solid film lubricants and design specifications for screw threads and fastener assembly requirements.
Reference
| Number | Title |
|---|---|
| 49CFR171-178 | This document is not part of the subscrption. |
| ANSI/ASQZ1.4 | This document is not part of the subscrption. |
| ASTMD1957 | This document is not part of the subscrption. |
| ASTMD1980 | This document is not part of the subscrption. |
| ASTMD2075 | This document is not part of the subscrption. |
| ASTMD287 | This document is not part of the subscrption. |
| ASTMD56 | This document is not part of the subscrption. |
| ASTMD86 | This document is not part of the subscrption. |
| ASTMD94 | This document is not part of the subscrption. |
| ASTMF766 | This document is not part of the subscrption. |
| FED-STD-313 | This document is not part of the subscrption. |
| FED-STD-791 | This document is not part of the subscrption. |
| MIL-PRF-680 | This document is not part of the subscrption. |
| MIL-STD-290 | This document is not part of the subscrption. |
| OSHA 29 CFR 1910.1200 | This document is not part of the subscrption. |
| OSHA29CFR1910.1 | This document is not part of the subscrption. |
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.