This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
BEARINGS, PLAIN, SELF-LUBRICATING SELF-ALIGNING, HIGH SPEED OSCILLATION −65 TO +160 °F
- Aerospace Standard
- AS81819/1A
- Revised
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Rationale
THE REASON FOR UPDATING THIS DOCUMENT IS TO BRING QUALIFICATION TESTING IN LINE WITH CURRENT INDUSTRY TEST CAPABILITIES. THIS SLASH SHEET DELETES THE −1, −3, AND −4 ONLY THE −2 REMAINS. OTHER SIZES WITH LINER THICKNESS LESS THAN .015″ WILL BE OFFERED IN A NEW STANDARD.
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| TABLE 1 | DIMENSIONS & QUALIFICATION TEST CRITERIA | |
| TABLE 1 | DIMENSIONS & QUALIFICATION TEST CRITERIA | |
| Unnamed Dataset 3 |
Issuing Committee
The objective of the Airframe Control Bearing Group (ACBG)is to provide industry experience and state of the art technology for airframe bearings, and issue as appropriate, published documents known as SAE Aerospace Standards. The focus of the Committees is present and future aircraft airframe control systems, bearings, and associated components.
The ACBG shall be responsible for the preparation, development, maintenance and promotion of all relevant specifications, standards, and requirements for airframe bearings, control system components, and associated hardware used in the design and construction of aerospace mechanical systems and subsystems. The ACBG shall also coordinate with other organizations for lubricants, control cables, and locking devices and shall utilize and promote the use of specifications published by those organizations. The ACBG shall function as a forum for technology transfer as it affects the Airframe bearing and control systems industry and for the enhancement of distribution channels.Reference
| Number | Title |
|---|---|
| AMS-H-6875 | This document is not part of the subscrption. |
| AMS-QQ-P-416 | This document is not part of the subscrption. |
| AMS2417 | NICKEL-ZINC ALLOY PLATING |
| AMS2759 | HEAT TREATMENT OF STEEL PARTS General Requirements |
| AMS5630 | STEEL, CORROSION RESISTANT 17 Chromium (High Carbon) |
| AMS5643 | STEEL, BARS AND FORGINGS, CORROSION RESISTANT 17Cr - 4.5Ni - 4Cu Precipitation Hardening |
| AMSH6875 | Heat Treatment of Steel, Process for |
| AMSQQP416 | Plating, Cadmium (Electrodeposited) |
| ANSI/ASMEB46.1 | This document is not part of the subscrption. |
| ASMEY14.5M | This document is not part of the subscrption. |
| ASTMA967 | This document is not part of the subscrption. |
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.