This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Fittings, Axially Swaged Tube with Flareless Separable, Fluid System 5080 psi (35 000 kPa), Specification for
- Aerospace Standard
- AS5958C
- Revised
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
This SAE Aerospace Standard (AS) establishes the requirements for externally swaged titanium tube fittings on titanium tubing with flareless separable fitting for use in hydraulic supply and return aerospace fluid systems up to operating pressure of 5080 psig (35 000 kPa) maximum and an operating temperature range of -65 to +275 °F (-54 to +135 °C).
Rationale
AS5958 Rev. C is an exact duplication of AS5958 Rev. A. AS5958 Rev. B had been issued prematurely and has been removed from circulation.
Rationale from Rev. A: Added -20 size and requirements and corrected errors.
Recommended Content
Topic
Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 | ||
Unnamed Dataset 5 | ||
Unnamed Dataset 6 | ||
TABLE 1B | RETURN PRESSURES | |
TABLE 2A | SUPPLY BENDING STRESSES | |
TABLE 2B | RETURN BENDING STRESSES | |
TABLE 3 | SUPPLY AND RETURN MINIMUM JOINT STRENGTH | |
TABLE 4 | TORQUES Dash | |
TABLE 5 | LENGTH AND CONFIGURATION OF TEST SAMPLES IN INCHES | |
TABLE 6A | SUPPLY QUALIFICATION TEST SCHEDULE | |
TABLE 6B | RETURN QUALIFICATION TEST SCHEDULE | |
TABLE 8 | FUELS | |
TABLE 9 | TEST LENGTHS | |
Unnamed Dataset 17 | ||
TABLE 10 | SERIES | |
TABLE 11 | WINDMILLING CURVES |
Issuing Committee
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
This Committee is responsible for developing and maintaining standards for design, test, and procurement of fluid systems part standards to improve reliability and economy. Their primary focus is on AS standards development and support of military standards. The Committee also develops ISO standards in a Subcommittee Advisory Group (SCAG) to ISO/TC 20/SC 10, and SAE-MA derivatives thereof.
Structure: SAE G-3 -- Parent committee SAE G-3A -- Aerospace Couplings Subcommittee SAE G-3B -- Aerospace Fittings Subcommittee SAE G-3D -- Aerospace Hose Subcommittee SAE G-3E - Aerospace Tubing Assemblies Subcommittee U.S. SCAG to ISO/TC 20/SC 10 -- ISO standards Major projects: Support of Military Standards Reform Support of military standard conversions to MIL-PERF and MIL-DTL. Development of AS replacements for military standards designated for conversion. Establish document to list G-3 accepted replacements for replaced part standards and military back-up specifications. Development of PRI QML/QPL Development of Performance Review Institute (PRI) process for approval and surveillance of manufacturers (Qualified Manufacturer List, QML) and for approval of standard parts as qualified for use (Qualified Parts List, QPL). Development of ISO Standards, Imperial Units ISO/TC 20/SC 10 standards have typically been developed in SI units. The ISO has approved development of inch-based ISO standards to support commercial aviation. Basic design, test, and procurement specifications will be selected from military standards that are to be converted to Non-Government standard (NGS) and developed as ISO standards.Reference
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.