This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
AEROSPACE STANDARD, GLAND DESIGN, O-RING AND OTHER ELASTOMERIC SEALS
- Aerospace Standard
- AS4716
- Issued
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
This SAE Aerospace Standard provides standardized gland (groove) design criteria and dimensions for elastomeric seal glands for static and dynamic applications. The glands have been specifically designed for applications using SAE AS568 size O-rings at pressures exceeding 1500 psi utilizing one or two anti-extrusion (backup) rings and applications at pressures under 1500 psi without backup rings. The glands have been sized to provide sufficient squeeze for effective sealing while at the same time limiting squeeze to allow satisfactory operation in dynamic applications. While specifically designed for standard size O-rings, these glands are also to be used with other elastomeric seals.
Recommended Content
Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
TABLE 1 | Standard Gland Dimensions and O-ring Squeeze in Inches | |
TABLE 2 | Standard Gland Width for Zero, One, and Two Backup | |
TABLE 3 | Standard Gland Diametral Clearance Dimensions | |
TABLE 4 | Standard Corner Radius Dimensions | |
TABLE 5 | Eccentricity for Standard Glands | |
TABLE 6 | ||
Unnamed Dataset 8 | ||
Unnamed Dataset 9 |
Issuing Committee
A6C2 is responsible for the development of standards, processes, and practices related to Seals, Scrapers and Bearings used in actuation systems for Commercial and Military air vehicles. The panel provides a forum for government engineers, prime contractors, OEMs and suppliers to exchange technical information, regulatory updates, recent technology developments, issues related to system development and in service operation and lessons learned.
Reference
Number | Title |
---|---|
ANSI/B46.1 | This document is not part of the subscrption. |
AS568 | AEROSPACE SIZE STANDARD FOR O-RINGS |
MIL-G-5514 | This document is not part of the subscrption. |
MIL-R-8791/1 | This document is not part of the subscrption. |
MS27595 | This document is not part of the subscrption. |
MS28782 | This document is not part of the subscrption. |
MS28783 | This document is not part of the subscrption. |
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.