This content is not included in your SAE MOBILUS subscription, or you are not logged in.
CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, SIZE 16 (FOR MIL-DTL-38999 SERIES II CONNECTORS)
- Aerospace Standard
Published November 28, 2018 by SAE International in United States
Downloadable datasets availableAnnotation ability available
LIMITED SCOPE REVISION IS REQUIRED TO CORRECT TABLE 5, IN THE CENTER COLUMN HEADING OF THE THREE TEMPERATURE RANGE COLUMNS UNDER MAXIMUM VOLTAGE DROP, THE FOOTNOTE 2 (25° +3°, -0 °C 2/) IS INCORRECT AND SHOULD BE CHANGED TO FOOTNOTE 4. THE NEW FOOTNOTE 4 UNDER THE TABLE SHOULD READ “AFTER CONDITIONING.” ALSO, PARAGRAPH 8C, PROVUDED SHOULD BE PROVIDED.
|Aerospace Material Specification||Alloy Iron Castings, Ductile, Sand, Corrosion and Heat Resistant, 2.0Cr - 20Ni (2.4 - 3.0C), Stress Relieved|
|Aerospace Standard||CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)|
|Aerospace Material Specification||Tape, Adhesive, Pressure-Sensitive Thermal Radiation Resistant, Aluminum Foil/Glass Cloth|
Data Sets - Support Documents
|TABLE 1||CONTACT DIMENSIONS|
|TABLE 1||CONTACT DIMENSIONS (CONTINUED)|
|TABLE 2||MARKING AND DESIGN CHARACTERISTICS|
|TABLE 3A||INNER CONTACT TOOL SELECTOR SETTING|
|TABLE 4||CONTACT ENGAGEMENT AND SEPARATION FORCES|
|TABLE 5||CONTACT RESISTANCE|
|TABLE 6||LOW SIGNAL LEVEL CONTACT RESISTANCE (INNER CONTACT ONLY) AND TENSILE STRENGTH|
|TABLE 7||PART NUMBER AND BIN CODE|
|TABLE 8||CONTACT MATING PART NUMBERS|
SAE Subcommittee AE-8C1, Connectors, shall be associated with those activities directed by the parent SAE Aerospace Council and the SAE Aerospace Electronics and Electrical Distribution Systems Committee, for the development and application of electrical optical connector and associated hardware standards and specifications. SAE Subcommittee shall also serve the needs of the Navy, Army, and Air Force through the establishment and maintenance of User Advisory Committees.
* Redlines comparisons are available for those standards listed in the Revision History that contain a radio button. A redline comparison of the current version against a revision is accomplished by selecting the radio button next to the standard and then selecting 'compare'. At this time, Redline versions only exist for some AMS standards. SAE will continue to add redline versioning with ongoing updates to SAE MOBILUS.