This content is not included in your SAE MOBILUS subscription, or you are not logged in.
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN
- Aerospace Standard
Published May 26, 2020 by SAE International in United States
Downloadable datasets available
This content contains a 2D/3D configuratorAnnotation ability available
FIGURE REDRAWN TO AS1132 STANDARDS, SPECS UPDATED, USAGE NOTE ADDED, DIMENSIONS AJ, AK ADDED, TABLE 5 AND TABLE 10 RETYPED TO CORRECT ERRORS.
Some older browsers could require a plugin install for 3D and or 2D previewer.
Data Sets - Support Documents
|TABLE 1A||DASH NUMBERS AND DIMENSIONS B - H|
|TABLE 1B||DASH NUMBERS AND DIMENSIONS J - AB|
|TABLE 1C||DASH NUMBERS AND DIMENSIONS AC - AK|
|TABLE 2||PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .1900 NOMINAL DIAMETER BOLTS|
|TABLE 3||PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .2500 NOMINAL DIAMETER BOLTS|
|TABLE 4||PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .3125 NOMINAL DIAMETER BOLTS|
|TABLE 5||PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .3750 NOMINAL DIAMETER BOLTS|
|TABLE 6||PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .4375 NOMINAL DIAMETER BOLTS|
|TABLE 7||PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .5000 NOMINAL DIAMETER BOLTS|
|TABLE 8||PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .5625 NOMINAL DIAMETER BOLTS|
|TABLE 9||PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .6250 NOMINAL DIAMETER BOLTS|
|TABLE 10||PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .7500 NOMINAL DIAMETER BOLTS|
|TABLE 11||PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .8750 NOMINAL DIAMETER BOLTS|
|TABLE 12||PART NUMBER AND SHANK LENGTH DIMENSIONS FOR 1.0000 NOMINAL DIAMETER BOLTS|
E-25 General Standards for Aerospace and Propulsion Systems
The SAE E-25 General Standards for Aerospace & Propulsion Systems committee addresses aerospace propulsion systems and components. These systems and components include bolts, screws, nuts, washers, studs, rivets, pins, covers, O-rings, brackets, plugs and associated procurement requirements, as well as solid film lubricants and design specifications for screw threads and fastener assembly requirements.
* Redlines comparisons are available for those standards listed in the Revision History that contain a radio button. A redline comparison of the current version against a revision is accomplished by selecting the radio button next to the standard and then selecting 'compare'. At this time, Redline versions only exist for some AMS standards. SAE will continue to add redline versioning with ongoing updates to SAE MOBILUS.