This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
BOLT, SHEAR – DOUBLE HEX HEAD, DRILLED SHANK UNS N07718 – 185 ksi
- Aerospace Standard
- AS3532A
- Revised
Downloadable datasets available
This content contains a 2D/3D
configurator
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Rationale
FIGURE 1 RE-DRAWN AND UPDATED PER Y14.5 M, REVISE P DIM TO BASIC, ADD EDGE DISTANCE EXCEPTION FOR HEAD MARKING, TABLES 1A, 1B, AND 2 RE-TYPED AND RE-FORMATTED, UPDATE REFERENCES, ADD NEW NOTE FOR DISPOSITION OF EXISTING INVENTORY, GENERAL EDITORIAL UPDATES.
Recommended Content
Aerospace Standard | BOLT, MACHINE - HEXAGON HEAD, PD SHANK, MJ THREAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 900 MPA MIN, METRIC |
Aerospace Material Specification | Bolts and Screws Nickel Alloy, Corrosion and Heat Resistant, Upset Headed, Roll Threaded, Fatigue Resistant |
Aerospace Material Specification | Bolts and Screws Steel, Corrosion and Moderate Heat Resistant, Heat Treated, Roll Threaded (Ams 5616) |
2D/3D Drawings
Some older browsers could require a plugin
install for 3D and or 2D previewer.
Data Sets - Support Documents
Title | Description | Download |
---|---|---|
TABLE 1A | DASH NO., THREAD, AS870 DASH NO., AND DIMENSIONS B THRU K | |
TABLE 1B | DASH NO. AND DIMENSIONS P THRU AD | |
TABLE 2 | PART NUMBERS, LENGTHS, AND APPROX. MASS | |
TABLE 2 | PART NUMBERS, LENGTHS, AND APPROX. MASS (CONTINUED) | |
TABLE 2 | PART NUMBERS, LENGTHS, AND APPROX. MASS (CONTINUED) | |
TABLE 2 | PART NUMBERS, LENGTHS, AND APPROX. MASS (CONTINUED) | |
TABLE 2 | PART NUMBERS, LENGTHS, AND APPROX. MASS (CONTINUED) | |
TABLE 2 | PART NUMBERS, LENGTHS, AND APPROX. MASS (CONTINUED) | |
TABLE 2 | PART NUMBERS, LENGTHS, AND APPROX. MASS (CONTINUED) | |
TABLE 2 | PART NUMBERS, LENGTHS, AND APPROX. MASS (CONTINUED) | |
TABLE 2 | PART NUMBERS, LENGTHS, AND APPROX. MASS (CONTINUED) | |
TABLE 2 | PART NUMBERS, LENGTHS, AND APPROX. MASS (CONTINUED) | |
TABLE 2 | PART NUMBERS, LENGTHS, AND APPROX. MASS (CONTINUED) | |
TABLE 2 | PART NUMBERS, LENGTHS, AND APPROX. MASS (CONTINUED) | |
TABLE 2 | PART NUMBERS, LENGTHS, AND APPROX. MASS (CONTINUED) | |
TABLE 2 | PART NUMBERS, LENGTHS, AND APPROX. MASS (CONTINUED) |
Issuing Committee
E-25 General Standards for Aerospace and Propulsion Systems
The SAE E-25 General Standards for Aerospace & Propulsion Systems committee addresses aerospace propulsion systems and components. These systems and components include bolts, screws, nuts, washers, studs, rivets, pins, covers, O-rings, brackets, plugs and associated procurement requirements, as well as solid film lubricants and design specifications for screw threads and fastener assembly requirements.
Reference
Number | Title |
---|
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.