This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, UNS S66286 - 160 KSI
- Aerospace Standard
- AS3530A
- Revised
Downloadable datasets available
This content contains a 2D/3D
configurator
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Rationale
REDRAW AND UPDATE FIGURE 1, ADD EDGE DISTANCE EXCEPTION FOR MARKING, ADD SURFACE TEXTURE REQUIREMENTS TO HEAD OD AND WRENCH PAD PER AS1132, DELETE .015 RADIUS AT TRANSITION OF WRENCH PADS AND BASE FLANGE, ADD SECTION THROUGH HEAD VIEW, IN TABLE 2 CORRECT ERROR IN L DIMENSION (MISSING DECIMAL) FOR AS3530-6-19, ALL TABLES RE-TYPED WITH EDITORIAL REVISIONS, ADD NEW NOTE FOR DISPOSITION OF EXISTING INVENTORY, UPDATE SURFACE TEXTURE SYMBOLS REFERENCE, GENERAL EDITORIAL UPDATES THROUGHOUT.
Recommended Content
| SAE ITC E&A Standard | AS1246 Bolt, Round Head (H.T.S.) |
| SAE ITC E&A Standard | AS23000-099 Bolt, Close Tolerance, Double Hexagon Extended Washer Head, HR650, .250-28 UNJF-3A MOD |
| SAE ITC E&A Standard | AS26100-199 Bolt. Close Tolerance - Dee Head, BS S.159, .190-32 UNJF-3A. MOD B.S.4084 |
Topic
2D/3D Drawings
Some older browsers could require a plugin
install for 3D and or 2D previewer.
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| TABLE 1A | DASH NO., A THD, AS870 DASH NO., AND DIMENSIONS B, ØC, D, ØE, F, ØG, AND H | |
| TABLE 1B | DASH NO. AND DIMENSIONS K, R. T. U. ØV. ØAB. AC AND AD | |
| TABLE 2 | PART NUMBERS, DIMENSIONS L, M, N AND APPROX MASS | |
| TABLE 2 | PART NUMBERS, DIMENSIONS L, M, N AND APPROX MASS (CONTINUED) | |
| TABLE 2 | PART NUMBERS, DIMENSIONS L, M, N AND APPROX MASS (CONTINUED) | |
| TABLE 2 | PART NUMBERS, DIMENSIONS L, M, N AND APPROX MASS (CONTINUED) | |
| TABLE 2 | PART NUMBERS, DIMENSIONS L, M, N AND APPROX MASS (CONTINUED) | |
| TABLE 2 | PART NUMBERS, DIMENSIONS L, M, N AND APPROX MASS (CONTINUED) | |
| TABLE 2 | PART NUMBERS, DIMENSIONS L, M, N AND APPROX MASS (CONTINUED) | |
| TABLE 2 | PART NUMBERS, DIMENSIONS L, M, N AND APPROX MASS (CONTINUED) | |
| TABLE 2 | PART NUMBERS, DIMENSIONS L, M, N AND APPROX MASS (CONTINUED) | |
| TABLE 2 | PART NUMBERS, DIMENSIONS L, M, N AND APPROX MASS (CONTINUED) | |
| TABLE 2 | PART NUMBERS, DIMENSIONS L, M, N AND APPROX MASS (CONTINUED) | |
| TABLE 2 | PART NUMBERS, DIMENSIONS L, M, N AND APPROX MASS (CONTINUED) | |
| TABLE 2 | PART NUMBERS, DIMENSIONS L, M, N AND APPROX MASS (CONTINUED) | |
| TABLE 2 | PART NUMBERS, DIMENSIONS L, M, N AND APPROX MASS (CONTINUED) |
Issuing Committee
E-25 General Standards for Aerospace and Propulsion Systems
The SAE E-25 General Standards for Aerospace & Propulsion Systems committee addresses aerospace propulsion systems and components. These systems and components include bolts, screws, nuts, washers, studs, rivets, pins, covers, O-rings, brackets, plugs and associated procurement requirements, as well as solid film lubricants and design specifications for screw threads and fastener assembly requirements.
Reference
| Number | Title |
|---|
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.