This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
BOLT, SHEAR – DOUBLE HEX HEAD, DRILLED SHANK AMS5853 – 160 KSI
- Aerospace Standard
- AS3529A
- Reaffirmed
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Rationale
FIGURE 1 RE-DRAWN AND UPDATED PER Y14.5M, REVISE P DIM TO BASIC, ADD EDGE DISTANCE EXCEPTION FOR HEAD MARKING, TABLES 1A, 1B, AND 2 RE-TYPED AND RE-FORMATTED, UPDATE REFERENCES, ADD NEW NOTE FOR DISPOSITION OF EXISTING INVENTORY, GENERAL EDITORIAL UDATES.
AS3529A HAS BEEN REAFFIRMED TO COMPLY WITH THE SAE FIVE-YEAR REVIEW POLICY.
Recommended Content
SAE ITC E&A Standard | AS1246 Bolt, Round Head (H.T.S.) |
SAE ITC E&A Standard | AS23000-099 Bolt, Close Tolerance, Double Hexagon Extended Washer Head, HR650, .250-28 UNJF-3A MOD |
SAE ITC E&A Standard | AS26100-199 Bolt. Close Tolerance - Dee Head, BS S.159, .190-32 UNJF-3A. MOD B.S.4084 |
Topic
Data Sets - Support Documents
Title | Description | Download |
---|---|---|
TABLE 1A | DASH NO., A THD, AS870 DASH NO., AND DIMENSIONS B THRU K | |
TABLE 1B | DASH NO. AND DIMENSIONS P THRU AD | |
TABLE 2 | PART NUMBERS, LENGTHS AND APPROX. MASS | |
TABLE 2 | PART NUMBERS, LENGTHS AND APPROX. MASS (CONTINUED) | |
TABLE 2 | PART NUMBERS, LENGTHS AND APPROX. MASS (CONTINUED) | |
TABLE 2 | PART NUMBERS, LENGTHS AND APPROX. MASS (CONTINUED) | |
TABLE 2 | PART NUMBERS, LENGTHS AND APPROX. MASS (CONTINUED) | |
TABLE 2 | PART NUMBERS, LENGTHS AND APPROX. MASS (CONTINUED) | |
TABLE 2 | PART NUMBERS, LENGTHS AND APPROX. MASS (CONTINUED) | |
TABLE 2 | PART NUMBERS, LENGTHS AND APPROX. MASS (CONTINUED) | |
TABLE 2 | PART NUMBERS, LENGTHS AND APPROX. MASS (CONTINUED) | |
TABLE 2 | PART NUMBERS, LENGTHS AND APPROX. MASS (CONTINUED) | |
TABLE 2 | PART NUMBERS, LENGTHS AND APPROX. MASS (CONTINUED) | |
TABLE 2 | PART NUMBERS, LENGTHS AND APPROX. MASS (CONTINUED) | |
TABLE 2 | PART NUMBERS, LENGTHS AND APPROX. MASS (CONTINUED) | |
TABLE 2 | PART NUMBERS, LENGTHS AND APPROX. MASS (CONTINUED) |
Issuing Committee
E-25 General Standards for Aerospace and Propulsion Systems
The SAE E-25 General Standards for Aerospace & Propulsion Systems committee addresses aerospace propulsion systems and components. These systems and components include bolts, screws, nuts, washers, studs, rivets, pins, covers, O-rings, brackets, plugs and associated procurement requirements, as well as solid film lubricants and design specifications for screw threads and fastener assembly requirements.
Reference
Number | Title |
---|
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.