This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, .3750-24 UNJF-3A
- Aerospace Standard
- AS3177B
- Revised
Downloadable datasets available
This content contains a 2D/3D
configurator
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Rationale
RELOCATE DATUM D, ADD TERTIARY DATUM CONTROL FOR DRILLED HOLES, REFORMAT DRILLED HOLE CALLOUT, REVISE LEAD THREAD CHAMFER, REVISE RUNOUT REQUIREMENT (2 PLACES) ON BOLT HEAD, NOTE 7 REFERENCE UPDATED, ADD DATUM C TO POSITION FEATURE CONTROL FRAME FOR MAJOR DIAMETER, ADD FSC CODE, ADD NEW NOTE FOR DISPOSITION OF EXISTING INVENTORY.
Recommended Content
| Aerospace Standard | BOLT, MACHINE – HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, CRES, UNS S66286, 130 KSI MIN, .5000-20 UNJF-3A |
| Aerospace Standard | BOLT, SHEAR – DOUBLE HEX HEAD, UNS S66286 – 160 KSI |
Topic
2D/3D Drawings
Some older browsers could require a plugin
install for 3D and or 2D previewer.
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| TABLE 1 | PART NUMBERS AND DIMENSIONS |
Issuing Committee
E-25 General Standards for Aerospace and Propulsion Systems
The SAE E-25 General Standards for Aerospace & Propulsion Systems committee addresses aerospace propulsion systems and components. These systems and components include bolts, screws, nuts, washers, studs, rivets, pins, covers, O-rings, brackets, plugs and associated procurement requirements, as well as solid film lubricants and design specifications for screw threads and fastener assembly requirements.
Reference
| Number | Title |
|---|---|
| AMS2645K | FLUORESCENT PENETRANT INSPECTION |
| AMS5643 | STEEL, BARS AND FORGINGS, CORROSION RESISTANT 17Cr - 4.5Ni - 4Cu Precipitation Hardening |
| AMS7474C | Bolts and Screws, Steel, Corrosion Resistant |
| ANSI Y14.5M | This document is not part of the subscrption. |
| ASME B46.1 | This document is not part of the subscrption. |
| ASME Y14.36M | This document is not part of the subscrption. |
| ASTME1417 | This document is not part of the subscrption. |
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.