This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, AMS5731, UNS S66286, .375-24 UNJF-3A
- Aerospace Standard
- AS3117A
- Revised
Downloadable datasets available
This content contains a 2D/3D
configurator
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Rationale
FIGURE REDRAWN, THREAD SPEC UPDATED, OPTIONAL SHAPE FOR LIGHTENING HOLE ADDED TABLE RETYPED TO REMOVE DUAL DIMENSIONING, NOTES BROUGHT UP TO DATE.
-
1
FOR SHORT BOLTS THREADED TO HEAD SEE AS9586.
-
2
FOR PART NUMBERS AS3117-13 THRU AS3117-17 THE THREAD PD SHALL REPLACE DATUM B.
-
3
MATERIAL: CORROSION RESISTANT STEEL AMS5731.
-
4
MANUFACTURING SPECIFICATION: AS7477.
-
5
FLUORESCENT PENETRANT INSPECTION PER ASTM E1417.
-
6
SURFACE TEXTURE: SYMBOLS PER ASME Y14.36M. REQUIREMENTS PER ASME B46.1. UNLESS OTHERWISE SPECIFIED, SURFACES TO BE 125 MICROINCHES Ra.
-
7
BREAK SHARP EDGES .003 TO .015 UNLESS OTHERWISE SPECIFIED.
-
8
DIMENSIONING AND TOLERANCING PER ANSI Y14.5M-1982 (ASME PUBLICATION).
-
9
DIMENSIONS IN INCHES. UNLESS OTHERWISE SPECIFIED, TOLERANCES: LINEAR DIMENSIONS ±.010, ANGULAR DIMENSIONS ±5°.
-
10
DO NOT USE UNASSIGNED PART NUMBERS.
-
11
A CHANGE BAR (|) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER IN LOCATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES, HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLUDING TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS, NOR IN DOCUMENTS THAT CONTAIN EDITORIAL CHANGES ONLY.
-
AS AND AMS ARE SAE INTERNATIONAL PUBLICATIONS.
-
ASME IS AN AMERICAN SOCIETY OF MECHANICAL ENGINEERS PUBLICATION.
-
ASTM IS AN ASTM INTERNATIONAL PUBLICATION.
Recommended Content
2D/3D Drawings
Some older browsers could require a plugin
install for 3D and or 2D previewer.
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| TABLE 1 | DIMENSIONS |
Issuing Committee
E-25 General Standards for Aerospace and Propulsion Systems
The SAE E-25 General Standards for Aerospace & Propulsion Systems committee addresses aerospace propulsion systems and components. These systems and components include bolts, screws, nuts, washers, studs, rivets, pins, covers, O-rings, brackets, plugs and associated procurement requirements, as well as solid film lubricants and design specifications for screw threads and fastener assembly requirements.
Reference
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.