This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
BEARING, ROLLER, ANTIFRICTION, ROD END, EXTERNAL THREAD, SELF-ALIGNING, AIR FRAME, -67 °F TO 350 °F TYPE 1, HEAVY DUTY, SEALED
- Aerospace Standard
- AS21429C
- Revised
Sector:
Issuing Committee:
Language:
English
Rationale
CHANGED THE TYPICAL CORNER BREAK IN FIGURE 1 FROM .002 TO .02 TO CORRECT A DECIMAL POINT TYPO. ADDED TESTING REQUIREMENT EXCEPTIONS FOR AMS3666 SEAL MATERIAL. ADDED CAUTIONARY NOTES FOR CADMIUM AND FOR GREASE CODE FOR BEARINGS MANUFACTURED PRIOR TO MAY 2018.
Recommended Content
Topic
Data Sets - Support Documents
No Datasets Available
Issuing Committee
ACBG Rolling Element Bearing Committee
The objective of the Airframe Control Bearing Group (ACBG)is to provide industry experience and state of the art technology for airframe bearings, and issue as appropriate, published documents known as SAE Aerospace Standards. The focus of the Committees is present and future aircraft airframe control systems, bearings, and associated components.
The ACBG shall be responsible for the preparation, development, maintenance and promotion of all relevant specifications, standards, and requirements for airframe bearings, control system components, and associated hardware used in the design and construction of aerospace mechanical systems and subsystems. The ACBG shall also coordinate with other organizations for lubricants, control cables, and locking devices and shall utilize and promote the use of specifications published by those organizations. The ACBG shall function as a forum for technology transfer as it affects the Airframe bearing and control systems industry and for the enhancement of distribution channels.Reference
| Number | Title |
|---|---|
| AMS-QQ-P-416 | This document is not part of the subscrption. |
| AMS3652 | POLYTETRAFLUOROETHYLENE FILM |
| AMS3666 | POLYTETRAFLUOROETHYLENE SHEET, GLASS FABRIC REINFORCED |
| AMS6260 | STEEL 2 Ni .9 Cr .35 Mo (.08-.13 C) |
| AMS6274 | STEEL .5 Ni .5 Cr .2 Mo (.18 - .23 C) |
| AMS6294 | STEEL - CARBURIZING Nickel Molybdenum |
| AMS6440 | STEEL Chromium |
| AMSQQP416 | Plating, Cadmium (Electrodeposited) |
| ANSI/ASMEB46.1 | This document is not part of the subscrption. |
| MIL-PRF-23827 | This document is not part of the subscrption. |
| MIL-PRF-81322 | This document is not part of the subscrption. |
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.