This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Tolerances Copper and Copper Alloy Bars and Rods
- Aerospace Material Specification
- AMS2221G
- Reaffirmed
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
This specification covers established inch/pound manufacturing tolerances applicable to bars and rods of copper and copper alloys ordered to inch/pound dimensions. These tolerances apply to all conditions, unless otherwise noted. The term “exclusive” is used to apply only to the higher figure of a specified range.
Rationale
AMS2221G has been reaffirmed to comply with the SAE Five-Year Review policy.
Recommended Content
| Aerospace Material Specification | Aluminum Bronze Rods, Bars, and Forgings 90.5Cu - 7.5Al - 1.95: Stress Relieved |
| Aerospace Standard | NUT, PLAIN, HEXAGON, BOSS CONNECTION, SILVER PLATED, 347 CRES UNS S34700 |
| Aerospace Material Specification | Magnesium Alloy Welding Wire 3.2 Rare Earths - 2.5Zn - 0.72Zr (EZ33A) |
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| TABLE 1 | Diameter or Thickness Tolerances, Cold Finished Rods | |
| TABLE 2 | Thickness Tolerances, Copper, Square and Rectangle Bars | |
| TABLE 3 | Thickness Tolerances, Nonrefractory Alloys, Square and Rectangle Bars | |
| TABLE 4 | Thickness Tolerances, Refractory Alloys, Square and Rectangle Bars | |
| TABLE 5 | Diameter or Thickness Tolerances, Extruded Round, Hexagonal, Octagonal, Square, and Rectangular Shapes | |
| TABLE 6 | Diameter Tolerances, Hot Finished Rounds | |
| TABLE 7 | Width Tolerances, Rectangles | |
| TABLE 8 | Length Tolerances | |
| TABLE 9 | Maximum Curvature, Cold Finished Rods, Hexagons, Octagons |
Issuing Committee
AMS D Nonferrous Alloys Committee
The committee of Nonferrous Alloys, AMS Committee D, shall prepare, coordinate, and revise documents related to nonferrous metals technology, such as aluminum, magnesium, and copper, through the participation of metals suppliers, users, and interested government agencies. Committee activities shall provide a forum for the cooperative interchange of ideas and experience of the participants, resulting in the publication of specifications that embody sound, established aerospace industry practices and requirements to serve the suppliers and customers of aerospace materials.
Reference
| Number | Title |
|---|---|
| ARP1917A | Clarification of Terms Used in Aerospace Metals Specifications |
* Redlines comparisons are available for those standards listed in the Revision History that contain a radio button. A redline comparison of the current version against a revision is accomplished by selecting the radio button next to the standard and then selecting 'compare'. At this time, Redline versions only exist for some AMS standards. SAE will continue to add redline versioning with ongoing updates to SAE MOBILUS.