This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Roller One-Way Clutch System Resonance
Annotation ability available
Sector:
Language:
English
Abstract
Driveline vibration is usually associated with friction clutch dynamics. However, the roller One-Way Clutch (OWC) can also be a source of vibration. The OWC has two basic operational modes: 1) Engaged, and 2) Freewheel. In this paper we will develop a means to predict the freewheel-mode resonant response of a roller OWC system. The study begins by making some fundamental simplifying assumptions, which lead us to an equivalent OWC system spring rate, kowc. The roller OWC system is then modeled as a simple mass-spring-mass system, from which the application of appropriate boundary conditions yield the desired fundamental resonant frequencies. This analysis method is then applied to a number of roller OWC systems, and the results are compared to numerical simulation and experimental results.
Recommended Content
Technical Paper | Verification of the One-Way Clutch Race Stress Equation |
Technical Paper | Roller Skewing as a Factor in One Way Clutch Operation |
Technical Paper | Torsional Vibration Analysis of Six Speed MT Transmission and Driveline from Road to Lab |
Citation
Kremer, J. and Altidis, P., "Roller One-Way Clutch System Resonance," SAE Technical Paper 981093, 1998, https://doi.org/10.4271/981093.Also In
1998 Transmission and Driveline Systems Symposium: New Developments and Advanced Concepts in Systems and Components
Number: SP-1324; Published: 1998-02-13
Number: SP-1324; Published: 1998-02-13
References
- Costin, D.P. “Analysis, Fabrication, and Preliminary Testing of the Hammerhead Sprag” BWA-ATC Technical Report 9513-R 1995
- Shabana, A.A. Theory of Vibration II First Springer-Verlag New York 18 22 1991
- Chesney, D.R. Kremer, J.M. “Generalized Equations for Roller One-Way Clutch Analysis and Design” SP-1241 SAE Warrendale, PA 29 37 1997
- Babbit, G. “Torque Converter Shudder: What It Is - And How To Correct It” Transmission Digest December 1993 56 61
- Hanba, S. “1-2 Upshift Shudder Investigation, Status Report” Borg-Warner Automotive internal report July 1997
- Knowledge Revolution Working Model Revision 3.0 1995
- DSP Development Corporation DADISP Version 4.0 1997
- Kremer, J.M. “Variable Rate Z-Spring Investigation” BWA-ATC Technical Report 9671-R 1996