This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Fatigue and Performance Data for Advanced Thin Wall Ceramic Catalysts
Annotation ability available
Sector:
Language:
English
Abstract
With stricter emissions standards, low back pressure requirements, and 100,000 mile durability specifications, ceramic catalysts have undergone significant developments over the past few years. The thrust in the ceramics area has centered on thin-wall structures to minimize back pressure and on high cell density for rapid light-off in close-coupled applications. The thin-wall structures are extruded from low expansion cordierite ceramic with adequate strength and thermal shock resistance equivalent to those of standard cordierite substrate. Examples of thin-wall substrate include 350XT which is extruded from a very low expansion dense cordierite ceramic, and 400/4 and 600/4 cell structures extruded from a low expansion modified cordierite ceramic.
This paper will focus on the high fatigue resistance, excellent conversion efficiency, and low back pressure of 350 XT substrates with advanced washcoat system. The fatigue data at 200°C and 400°C show that the 350 XT catalyst is considerably superior to the standard three-way-catalyst employing 400/6.5 substrate. The fatigue constant for 350 XT catalyst ranges from 35 at 200°C to 45 at 400°C which implies that the advanced 350 XT catalyst can sustain 20 to 40% higher stress than the standard 400/6.5 catalyst over the 100,000 mile durability requirement. The advanced catalyst technology contains a high temperature stabilized alumina and ceria washcoat system which, following aging equivalent to 100,000 miles, yields FTP efficiencies which meet Tier 1 emission standards. The paper will conclude with the back pressure data which are superior to those for the standard 400/6.5 catalyst system due to thinner walls and larger hydraulic diameter.
Recommended Content
| Technical Paper | Optimization of Substrate/Washcoat Interaction for Improved Catalyst Durability |
| Technical Paper | High Temperature Fatigue in Ceramic Honeycomb Catalyst Supports |
| Special Publication | General Emissions Research and Development |
Authors
Topic
Citation
Gulati, S., Williamson, B., Nunan, J., Andersen, K. et al., "Fatigue and Performance Data for Advanced Thin Wall Ceramic Catalysts," SAE Technical Paper 980670, 1998, https://doi.org/10.4271/980670.Also In
References
- Sheppard, L.M. “Automotive Performance Accelerates with Ceramics,” Ceram Bull. 69 6 1990
- Yamamoto, H. Horie, H. Kitagawa, J. Machida, M. “Reduction of Wall Thickness of Ceramic Substrates for Automotive Catalysts,” SAE No. 900614 1990
- Day, J.P. Locker, R.J. “Decomposition of Aluminum Titanate Solid Solutions,” First Int'l Symposium and Exposition Ceramics for Environmental Protection Koln 1988
- Day, J.P. Locker, R.J. 1989
- Gulati S.T. “Advanced Ceramics for Automotive Emissions Control,” confed. Indian Industries New Delhi 1996
- Gulati S.T. Helfinstine; J.D. “High Temperature Fatigue in Ceramic Wall-Flow Diesel Filter,” SAE No. 850010 1985 Int'l Congress & Exposition Detroit, Michigan Feb. 25 March 1 1985
- Helfinstine J.D. Gulati S.T. “High Temperature Fatigue in Ceramic Honeycomb Catalyst Supports,” SAE No. 852100 1985
- Wiederhorn S.M. “Subcritical Crack Growth in Ceramics” Fracture Mechanics of Ceramics 2 Bradt, Hasselman Lange Plenum Press New York 1974 613 646
- Ritter, J.E. Jr. “Engineering Design and Fatigue Failure of Brittle Materials” Fracture Mechanics of Ceramics 4 Bradt, Hasselman Lange Plenum Press New York 1978 667 686
- Gulati S.T. Summers J.C. Linden D.G. White; J.J. “Improvements in Converter Durability and Activity via Catalyst Formulation,” SAE Paper 890796 February 1989
- Gulati S.T. Cooper B.J. Hawker P.N. Douglas J.M “Optimization of Substrate/Washcoat Interaction for Improved Catalyst Durability,” SAE Paper 910372 February 1991
- Michalske T.A. Freiman S.W. “A Molecular Mechanism for stress Corrosion in Vitreous Silica” J. Am. Ceram. Soc. 66 4 284 8 1983
- Freiman S.W. White G.S. Fuller, E.R. Jr. “Environmentally Enhanced Crack Growth in Soda-Lime Glass” J.Am. Ceram. Soc. 68 3 108 12 1985
- Nunan J.G. Williamson W.B. Robota H.J. Henk M.G. “Impact of Pt-Rh and Pd-Rh Interactions on Performance of Bimetal Catalysts” SAE Paper 950258 1995
- Nunan J.G. Williamson W.B. Robota H.J. “Advanced TWC Technologies Using CeO 2 /ZrO 2 Solid Solutions” SAE Paper 960798 1996
- Nunan J.G. “Physico-Chemical and Catalytic Properties of CeO 2 /ZrO 2 Solid Solutions Supported and Dispersed on γ-Alumina” SAE Paper 970467 1997
- Sims G.S. Johri S. “Catalyst Performance Study Using Taguchi Methods” SAE Paper 881589 1988
- Ball D.J. “A Warm-up and Underfloor Converter Parametric Study” SAE Paper 932765 1993
- Gulati S.T. “New Developments in Catalytic Converter Durability” CAPOC-2 Conference Brussels 1990
- Weibull W. “A Statistical Distribution Function Of Wide Applicability” J.App. Mech. 1951 293 297