This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Total Vehicle Vibration Isolation (TVVI) For Automotive and Other Applications
Annotation ability available
Sector:
Language:
English
Abstract
This paper presents a model of Total Vehicle Vibration Isolation (TVVI) system for vibration analysis and optimization. The TVVI system can handle any number of flexible and rigid components, frequency independent and frequency dependent parameters of spring-damper subsystems, and considers motion with all six degrees of freedom. The modal mass, stiffness, and damping of the eigenvectors of finite-element (FE) model of the flexible components are included in the total vehicle model, instead of the original FE model. This procedure reduces the number of degree of freedom (DOF) of total vehicle model, so that the practical optimization including large FE model can be performed.
Optimization module includes various options of objective functions (six kinds of energy and ride quality) for different design goals. Applications of TVVI include cars, buses trucks or any structure where NVH is an issue.
Recommended Content
Authors
Citation
Su, S., Chamarthi, G., Nayani, S., and Kumra, M., "Total Vehicle Vibration Isolation (TVVI) For Automotive and Other Applications," SAE Technical Paper 980275, 1998, https://doi.org/10.4271/980275.Also In
References
- Belegundu, A. D. Berke, L. Patnaik, S. N. “An Optimization Program based on Method of Feasible Directions” NASA technical Memorandum 4552 1994
- Besselink, I. Van Asperen, F. “Numerical Optimization of the Linear Dynamic Behavior of Commercial Vehicles” Vehicle System Dynamics 23 53 70 1994
- Dahlberg, T. “Comparision of Ride Comfort Criteria for Computer Optimization of Vehicles Traveling on Randomly Profile Roads” Vehicle System Dynamics 9 291 307 1980
- Del Castillo, J. M. Pintado, P. Benitez, F. G. “Optimization for Vehicle Suspension II: Frequency Domain” Vehicle System Dynamics 19 331 352 1990
- Demic, M. “Optimization of Vehicles Elasto- Damping Elements Characteristics from the Aspect of Ride Comfort” Vehicle System Dynamics 23 351 377 1994
- Dokainish, M. A. ELMadany, M. M. “Dynamic Response of Tractor-Semitrailer Vehicle to Random Input” The Dynamics of Vehicles on Roads and on Tracks Swets and Zeitlinger-Amsterdam and Lisse 1977
- Duncan, A. E. “Application of Modal Modeling and Mount System Optimization to Light Duty Truck Ride Analysis” SAE paper 811313 1981
- EGS inc. Engine Mount Optimization 1996
- Elbeheiry, E. M. Karnopp D.C. Elaraby M. E. Abdelraaouf A. M. “Suboptimal Control Design of Active and Passive Suspensions Based on a Full Car Model” Vehicle System Dynamics 26 197 222 1996
- EL-Gindy, M. Tong L. Tabarrok B. “Frequency Response Analysis of Canadian Logging Trucks” Vehicle System Dynamics 23 325 349 1994
- ELMadany, M. M. Samaha, M. E. “Optimum Response of a Stochastic Model of a Tractor-Semitrailer Vehicle- Part I: Linear and Nonlinear Model of a Passively Suspended Vehicle, Diagnostic” Vehicle Dynamic and Special Topics 1989
- Gadala, M. ELMadany, M. M. Gadala, M. A. “Finite Element and Analytical Modeling of a tractor-Semitrailer Vehicle” Proceedings of the IAST ED International Symposium-Modeling and Simulation Lugano 1985
- Gillespie, T. D. “Fundamentals of Vehicle Dynamics” SAE Warrendele, Pennsylvania 1992
- Good, M. C. “Prescribed Trajectory Vehicle Model” The Dynamics of Vehicles Swets & Zeitlinger Amsterdam 1987
- Inman, D. J. “Engineering Vibration” Prentice Hall 1996
- Jansen, S. T. H. Van Oosten, J. J. M. “Development and Evaluation of Vehicle Simulation Models for a 4WS Application” Vehicle System Dynamics 24 343 363 1995
- Karlsson, L. Boman, P. “Transient Dynamic Analysis of Linear Model of Bus” Vehicle System Dynamics 16 75 89 1987
- Lee, C.-R Kim, J.-W Hallquist, J. O. Zhang, Y. Farahan, i A. D. “Validation of a FEA Tire Model for Vehicle Dynamic Analysis and Full Vehicle Real Time Proving Ground Simulations” SAE paper 971100 1997
- Matsuda, A. Hayashi, Y. Hasegawa, J. “Vibration Analysis of a Diesel Engine at Cranking and Idling Modes and Its Mounting System” SAE paper 870964 1987
- Meirovitch, L. “Principles and Techniques of Vibrations” Prentice Hall 1997
- Nalecz, A. G. “Application of Sensitivity Methods to Analysis and Synthesis of Vehicle Dynamic Systems” Vehicle System Dynamics 18 1 44 1988
- Newland, D. E. “An Introduction to Random Vibrations and Spectral Analysis” Logman London 1984
- Nigam, N. C. Narayanan, S. “Applications of Random Vibrations” Narosa Publishing House 1994
- Olatunbosun, O. A. Dunm, J. W. “A Simulation Model for Passive Suspension Ride performance Optimization” Automotive Simulation '91 131 142 1991
- Sharp, R. S. Hassan, S. A. “An Evaluation of Passive Automotive Suspension Systems with Variable Stiffness and Damping Parameters” Vehicle System Dynamics 15 335 350 1986
- Van Deusen, B. D. “Truck Suspension System Optimization” SAE paper 710222 1971
- Vanderplaats, G. N. “Numerical Optimization Techniques for Engineering Design: With Applications” McGraw -Hill New York 1984
- Zoutendyk, G. “Method of Feasible Directions” Van Nostran Princeton, NJ 1960