This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Polymer Additives as Mist Suppressants in Metalworking Fluids Part IIa: Preliminary Laboratory and Plant Studies - Water Soluble Fluids
Annotation ability available
Sector:
Language:
English
Abstract
Mist generated from water-soluble fluids used in machining operations represents a potentially significant contribution to worker exposure to airborne particles. Part I of this study [1], discussed polymer additives as mist suppressants for straight mineral oil metalworking fluids (MWF), which have been successfully employed at several locations. This paper focuses on recent developments in polymer mist suppressants for water-based MWF, particularly in the production environment. The polymer developed and tested in this study functions on a similar basis to that for straight oil anti-mist additives. This water soluble polymer suppresses the formation of small mist droplets and results in a distribution of larger droplet sizes. These larger droplets tend to settle out near the point of machining, resulting in a significant decrease in the total airborne mist concentration.
This new polymer additive has the added property of re-associating with itself after shear stresses break it apart, so that the anti-mist effect of the polymer is maintained for extended periods in the recirculated cutting fluid systems. Preliminary laboratory and plant pilot testing shows 40-60% reduction in oil mist levels using 1000-1250 ppm of the additive, with the effect lasting at least 2 weeks, the longest test duration to-date. To determine concentration of the polymer is a treated coolant system, a viscosity comparison technique has been identified which can readily be performed in the plant environment. In addition, no adverse impact on wastewater treatability, part quality, nor seals have been observed.
Recommended Content
| Technical Paper | Cooling Pump Development using Plastic Material |
| Technical Paper | Valve Lifter Guides The Development of a Nylon Internal Engine Component |
| Technical Paper | New Hydrophilic, Composite Membranes for Air Removal from Water Coolant Systems |
Authors
Citation
Kalhan, S., Twining, S., Denis, R., Marano, R. et al., "Polymer Additives as Mist Suppressants in Metalworking Fluids Part IIa: Preliminary Laboratory and Plant Studies - Water Soluble Fluids," SAE Technical Paper 980097, 1998, https://doi.org/10.4271/980097.Also In
References
- Marano, R. Messick, R. Smolinski, J. Toth, L. Polymer Additives as Mist Suppressants in Metalworking Fluids Part I: Laboratory and Plant Studies - Straight Mineral Oil Fluids SAE International Congress and Exposition February 27 March 2 1995 Detroit, MI Paper No. 950245
- Smolinski, J. M. Atomization of Dilute Polyisobutylene / Mineral Oil Solutions Wayne State University Detroit 1994
- Gulari, E. Manke, C. W. Smolinski, J. M. Kalhan, S. Effect of Polymer Additives on Atomization of Emulsions Paper no. 97g, American Institute of Chemical Engineers Annual Meeting San Francisco, CA 1994
- Kalhan, S. Effect of Polymer Surfactant Interactions on Atomization of Emulsions Wayne State University 1995
- Smolinski, J. M. Polymeric Additives for Suppression of Machining Fluid Mists Society of Manufacturing Engineers Metalworking Fluids Seminar Troy, MI 1996
- Childers, J. C. Huang, S. J. Romba, M. Metalworking Fluid Additives for Waste Minimization Waste Minimization and Waste Treatment of Metalworking Fluids Industrial Lubricant Manufacturers Association Publication 1990
- Kalhan, S Twining, S. Denis, R. Marano, R. Messick, R. Development of Shear Stable Mist Suppressants for Aqueous Metalworking Fluids Symposium Proceedings, The Industrial Environment: Metalworking Fluids Symposium - II American Automobile Manufacturers Association (AAMA) September 1997