This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Correlation of Prephosphate Treatment, Surface Friction and Powdering of Galvanneal During Forming
Annotation ability available
Sector:
Language:
English
Abstract
Prephosphating of galvanneal steel sheet has been shown to improve its forming performance. This improved formability is due to a reduced coefficient of surface friction caused by the prephosphate treatment. Also, increased levels of powdering have been observed with prephosphated galvanneal sheet during cup-drawing operations. It has also been shown that powdering is strongly dependent on the strain state, especially the compressive strain component, during the forming process. Combining these two observations, a possible explanation for the increased powderability of prephosphated galvanneal may be that the prephosphate treatment alters the strain state during the forming of galvanneal sheet, which in turn impacts the powderability. In order to examine this hypothesis, cups were drawn from delta-phase galvanneal sheet samples which were subjected to various prephosphate treatments. The changes in strain state along the walls of the cups were measured using circle grid analysis. Numerical simulations using finite element analysis were also performed to assess the changes in local strain state with variations in the coefficient of friction. Correlations among prephosphate treatment, surface friction, strain state and powdering will be discussed.
Recommended Content
| Technical Paper | Operant Friction Coefficient of Prephosphated Galvanneal under Punch Stretching |
| Technical Paper | The Development of a Hat Channel Test for Evaluating Galvanneal Flaking Performance |
Authors
Citation
Kunde, N., Saran, M., and Michal, G., "Correlation of Prephosphate Treatment, Surface Friction and Powdering of Galvanneal During Forming," SAE Technical Paper 980075, 1998, https://doi.org/10.4271/980075.Also In
References
- Riesop J. Rolland W. A. “Prephosphating of Hot-Dip Galvanized Steel Sheet,” Galvatech '92 Proceedings CRM, Verlag Stahleisen Düsseldorf, Germany 236 240 1992
- Shastry C. R. Fountoulakis S. G. “Laboratory Evaluation of Formability, Weldability and Painted Corrosion Performance of Prephosphated Electrogalvanized Sheet Steel,” Galvatech '95 Proceedings ISS Warrendale, PA 627 633 1995
- Chou K-C. “Performance of Prephosphated Galvanneal Sheet Steel,” Galvatech '95 Proceedings ISS Warrendale, PA 269 276 1995
- Raghavan K. S. Garrett, T. J. Jr. Speer J. G. “Sheet Steel Surface Treatments for Enhanced Formability,” SAE Technical Paper No. 940945 1994
- Kunde N. D. Michal G. M. Payer J. H. “Performance Evaluation of Prephosphated Galvannealed Steel Sheet,” Galvatech '95 Proceedings ISS Warrendale, PA, 635 643 1995
- Kunde N. D. Michal G. M. Payer J. H. “Performance Evaluation of Prephosphated Galvannealed Steel Sheet for Automotive Applications,” SAE Technical Paper No. 970152 1997
- Kunde N. D. Michal G. M. Payer J. H. “Performance Evaluation of Prephosphated Zeta-Phase Galvannealed Steel Sheet,” Zinc-Based Coating Systems: Production and Performance Goodwin F. E. et al. The Minerals, Metals and Materials Society Warrendale, PA 1997
- Freeman D. B. Phosphating and Metal Pre-treatment Industrial Press Inc. New York, NY 50 102 1986
- Rausch W. The Phosphating of Metals Finishing Publications Ltd. Teddington, Middlesex, England 137 326 1990
- Rangarajan V. Jagannathan V. Raghavan K. S. “Influence of Strain State on Powdering of Galvannealed Sheet Steel,” SAE Technical Paper No. 960026 1996
- Yasuda A. Yasuda K. Tobiyama Y. Isobe M. Yamato K. “Qualities of Galvannealed Steel Sheet with Fe-P Coating for Automotive Use,” Galvatech '89 Proceedings ISIJ Tokyo, Japan 321 328 1989
- LS-DYNA - User's Manual LSTC Corp. Livermore, CA 1997
- Saran M. J. Schedin E. Samuelsson A. Melander A. Gustafsson C. “Numerical and Experimental Investigations of Deep Drawing of Metal Sheets,” J. Eng. for Industry, ASME Trans. 112 272 277 1990
- Saran M. J. Schedin E. Samuelsson A. Melander A. Gustafsson C. “Computational and Experimental Modeling of Stretch Forming Operations,” J. Material Shaping Technology 8 31 38 1990