This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Drawbeads in Sheet Metal Stamping - A Review
Annotation ability available
Sector:
Language:
English
Abstract
The paper reviews the role of drawbeads in sheet metal stamping. The design of drawbeads is discussed in depth, with treatment of different bead cross sections, bead end shapes, and bead materials. International standards and practices are included. This is followed by the historical development of the modeling of the drawbead restraining force, starting with basic equilibrium approaches, and leading to the use of the finite element method which permits the study of drawbead effects on sheet metal flow in three dimensions. Finally, the potential of active drawbeads is described based upon ongoing research which is directed toward closed-loop computer control of the stamping process through adjustment of the drawbead penetration.
Recommended Content
Authors
Topic
Citation
Xu, S., Bohn, M., and Weinmann, K., "Drawbeads in Sheet Metal Stamping - A Review," SAE Technical Paper 970986, 1997, https://doi.org/10.4271/970986.Also In
References
- ASM International 1988 Metal Handbook 9th 14 Semiatin S.L. Metals Park Ohio
- Cao, H.L. Teodosiu C. 1992 Numerical Simulation of Drawbeads for Axisymmetric Deep-Drawing Numerical Methods in Industrial Forming Processes Chenot Wood and Zienkiewics Balkerma, Rotterdam 439 449
- Cao, J. 1992 Draw Bead Penetration as a Control Element of Material Flow during Sheet Metal Forming MIT
- Cao, J. Boyce M.C. 1993 Drawbead Penetration as a Control Element of Material Flow SAE Paper No. 930517
- Chabrand, P. Dubois F. 1992 Influence of the Drawbead on the Blankholder Resulting Forces Numerical Methods in Industrial Forming Processes Chenot Wood and Zienkiewics Balkerma, Rotterdam 449 455
- Chabrand, P. Dubois F. Gelin J.C. 1996 Modeling Drawbeads in Sheet Metal Forming Int. J. Mech. Sci. 38 1 59 77
- Carleer, B.D. Vreede P.T. Drent P. Louwes M.F.M. Huetink J. 1994 Modeling Drawbeads with Finite Elements and Verification J. Mater. Process. Technol. 45 63-68
- Carleer, B.D. Louwes M.F.M. Huetink J. Vreede P.T. 1995 Modeling Drawbeads in 3D Finite Element Simulations of the Deep Drawing Process Proc. Numiform'95 Balkema, Rotterdam
- Carleer, B.D. Meinders T. Huetink H. 1996 Equivalent Drawbead Model in Finite Element Simulations Proc. Numisheet'96
- Dalton, G.M. Schey J.A. 1992 Effect of Bead Finish Orientation on Friction and Galling in the Drawbead Test SAE Paper No. 920632
- Dalton, G.M. Schey J.A. 1991 Effects of Bead Surface Preparation on Friction in the Drawbead Test SAE Paper No. 910511
- Demeri, M.Y. 1993 Drawbeads in Sheet Metal Forming J. Mats. Eng. & Performance 2 6 863 866
- Eary, D.F. Reed E.A. 1974 Techniques of Pressworking Sheet Metal Prentice-Hall, Inc.
- Fukui, S. Yoshida K. 1962 Measurement of the Mean Friction Coefficient in Sheet Drawing Int. J. Mach. Tool Des. Res. 2 19 26
- Furubayashi, T Ujihara S. Sakamoto T. 1988 Simulation of Forming Severity on Autobody Panels Using a CAD System-Analysis of Drawbead and its Control Proc. 15th Biennial Congress of IDDRG May 16-18 Dearborn, MI, USA 243 250
- Herderich, M.R. 1990 Experimental Determination of the Blankholder Forces Needed for Stretching Draw Die Design SAE Paper No. 900281
- Karima, M. Tse W. 1988 Effect of Process and Material Windows of Formability of Drawbead Controlled Geometries Proc. the Winter Annual Meeting of ASME Chicago, IL Nov. 27 Dec. 2 153 166
- Karima, M. Tse W. 1989 Formability and Uniformity Aspects in Drawbead Controlled Geometries J. Mater. Shaping Technol. 6 181 193
- Kernosky, S.K. Weinmann K.J. Michler J.R. Kashani A.R. 1997 Development of a Die Shoulder Force Transducer for Sheet Metal Forming Research Trans. ASME, J. Manufact. Sci. and Eng. 1997
- Kojima, M. Sudo C. Hayashi Y. 1976 Effectiveness of Flange Holding on the Die Surface with Draw Beads Proc. 9th Biennial Congress of IDDRG Oct. 13-14 Ann Arbor, MI, USA 207 219
- Kojima, M. 1986 Effect of Drawbead Geometry on Drawbead Forces in Sheet Metal Forming Proc. 14th Biennial Congress of IDDRG Apr. 21-23 Koln, Germany
- Kluge, S. 1992 39 2 117 123
- Lange, K. 1985 Handbook of Metal Forming McGraw-Hill Book Company
- Levy, B.S. 1983 Development of a Predictive Model for Draw Bead Restraining Force Utilizing Work of Nine and Wang J. Applied Metalworking 3 1 38 44
- Levy, B.S. 1985 Modeling Binder Restraint Using Parametric Models Based on Mechanistic Considerations Computer Modeling of Sheet Metal forming Process; Theory, Verification and Application Wang N.M. Tang S.C. Ann Arbor, MI Apr. 29-30 177 191
- Maker, B. Samanta S.K. Grab G. Triantafyllidis N. 1987 An Anlysis of Drawbeads in Sheet Metal Forming; Part 2-Experimental Verification J. Eng. Mater and Technol., Trans ASME 109 164 170
- Meuleman, D.J. Dwryer T.E. 1988 Die Materials and Treatments with Electrogalvanized Steels SAE Paper No: 880369
- Michler, J.R. Weinmann K.J. 1995 Variation of Friction in a Strip Test Apparatus with Controllable Drawbead Penetration SAE Paper No. 950698
- Michler, J.R. Weinmann K.J. 1995 Experimental and Finite Element Study of Sheet Metal Flow in a Strip Test Apparatus with Controllable Drawbead Penetration Trans. NAMRI/SME 23 Michigan Technological University Houghton, MI 45 50
- Michler, J.R. Kashani A.R. Bohn M.L. Weinmann K.J. 1995 Feedback Control of the Sheet Metal Forming Process Using Drawbead Penetration As the Control Variable Trans. NAMRI/SME 23 Michigan Technological University Houghton, MI 71 76
- Michler, J.R. 1994 The Drawbead as a Control Element in Sheet Metal Forming Michigan Technological University
- Michler, J.R. Kashani A.R. Mejlessi S.A. Weinmann K.J. 1994 A Strip Drawing Simulator with Computer Controlled Drawbead Penetration and Blankholder Pressure J. Mater. Process. Technol. 43 177 194
- Michler, J.R. Rao V.D. Kashani A.R. Majlessi S.A., Weinmann K.J. 1993 New concept for a Hydraulically Controlled Sheet Metal Strip Drawing Test Apparatus Trans. NAMRI/SME 21 25 31
- Nine, H.D. 1978 Drawbead Forces in Sheet Metal Forming Mechanics of Sheet Metal Forming Koistinen D.P. Wang N.M. Plenum Press 179 211
- Nine, H.D. 1982 The Applicability of Coulomb's Friction Law to Drawbeads in Sheet Metal Forming J. Applied Metal Working 2 3 July 200 210
- Nine, H.D. 1982 New Drawbead Concepts for Sheet Metal Forming J. Applied Metal Working 2 3 185 192
- Nine, H.D. 1988 SHAPEMATE- An Insertable, Adjustable Force Drawbead SAE Paper No. 880212
- Nine, H.D. Smith T.R. 1981 Urethane Drawstrips: A New Method to Control Sheet Metal Flow during Forming J. Applied Metalworking 2 1 19 27
- Oehler, G. 1960 The use of hydraulically controlled pressure elements to change the drawbead pressure during sheet metal forming 5 271 272
- Oehler Kaiser 1966 Cutting, Stamping and Drawing Tools 5th Springer-Verlag 353 361
- Painter, M.J. Pearce R. 1976 Metal Flow through a Drawbead, Sheet Metal Industries July 12
- Sanchez, L.R. Weinmann K.J. 1996 An Analytical and Experimental Study of the Flow of Sheet Metal between Circular Drawbeads J. Eng. Ind., Trans. ASME 118 45 54
- Sanchez, L.R. Weinmann K.J. 1988 A general Computer Model for Plane Strain Sheet Flow and its Application to Flow between Circular Drawbeads Proc. 15th Biennial Congress of IDDRG May 16-18 Dearborn, MI 217 226
- Schey, H.A. 1994 Geometric Factors Affecting Results from the Drawbead Simulation(DBS) Test Lubrication Engineering 50 3 255 260
- Schey, J.A. Smith M.K. 1993 Report of NADDRG Friction Committee on Reproducibility of Friction Tests within and between Laboratories SAE Paper No. 930811
- Schey, H.A. Watts S.W.A. 1992 Transient Tribological Phenomena in Drawbead Simulation SAE Paper No. 920634
- Shiokawa, M. Takizawa H. Ujihara S. Usuda M. Ohwue T. 1985 Predictive Evaluation of Draw-in, Elongation and Breakage during Forming Processes Computer Modeling of Sheet Metal Forming Process: Theory, Verification and Application Wang N.M. Tang S.C. Apr. 29-30 Ann Arbar, MI 243 257
- SME 1990 Die Design Handbook 3rd Smith D.A.
- Stoughton, T.B. 1988 Model of Drawbead Forces in Sheet Metal Forming Proc. 15th Biennial Congress of IDDRG May 16-18 Dearborn, MI 205 215
- Story, J.M. Weinmann K.J. 1980 The Effects of Surface Topography and Surface Chemistry on Metal Build-Up on the Tools during the Forming of Aluminum Sheet Tran. 8th NAMRC May 18-21 University of Missouri-Rolla Rolla, Missouri 245 251
- Story, J.M. Chandorkar K.V. Burk T.G. 1996 Die Design Recommendations for Aluminium Sheet Forming Siegert H.K. Universität Stuttgart Germany 215 247
- Swift, H. W. 1948 Plastic Bending under Testing, Engineering Oct. 333 335 357 359
- Triantafyllidis, N. Maker B. Samanta S.K. 1986 An Analysis of Drawbeads in Sheet Metal Forming: Part I-Problem Formulation J. Eng. Mater. Technol., Trans. ASME 108 321 327
- Tufekci, S.S. Wang C.T. Kinzel G.L. Altan T. 1994 Estimation and Control of Drawbead Forces in Sheet Metal Forming SAE Paper No. 940941
- Tufekci, S.S. Wang C.T. Kinzel G.L. Altan T. 1993 Drawbead Design and Estimation of Drawbead Forces in Sheet Metal Forming Report No. ERC/NSM-S-93-13, Engineering Research Center for Net Shape Manufacturing The Ohio State University
- 1990 The Development of Drawbeads in Large Stamping Dies BDEV GmbH
- Waller, J.A. 1978 Press Tools and Presswork Portcullis Press
- Wang, N.M. 1982 A Mathematical Model of Drawbead Forces in Sheet Metal Forming J. Applied Metalworking 2 3 193 199
- Wang, N.M. Shah V.C. 1991 Drawbead Design and Performance J. Mater. Shaping Technol. 9 1 21 26
- Weidemann, C. 1978 The Blankholding Action of Draw Beads Sheet Metal Industries September 984
- Weidemann, C. 1978 The Blankholding Action of Draw Beads Proc. 10th Biennial Congress of IDDRG University of Warwick England Apr. 17-21 79 85
- Weinmann, K.J. Rosenberger A.H. Sanchez L.R. Turkovich B.F. 1988 The Bauschinger Effect of Sheet Metal under Cyclic Reverse Pure Bending Annals of CIRP 37 1 289 293
- Weinmann, K.J. Michler J.R. Rao V.D. Kashani A.R. 1994 Development of a Computer-Controlled Drawbead Simulator for Sheet Metal Forming Annals of the CIRP 43 1 257 261
- Wilczynski, J.S. Gregoire C.A. 1992 The Effect of Die Materials and Electro-Etching on Frictional Characteristics of Automotive Sheet Steels SAE Paper No. 920635
- Wouters, P. Monfort G. Defourny J. 1994 Numerical Simulation and Experimental Evaluation of the Modifications of Material Properties in a Drawbead Proc. 18th Biennial Congress of IDDRG Lisbon May 16-17 389 401
- Xu, S.G. Weinmann K.J. 1996 A Three-Dimensional FE Study of Sheet Metal Flow Over the Drawbead SAE Paper No. 960591
- Xu, S.G. Weinmann K.J. 1996 An Investigation of Drawbead Control in Rectangular Box Forming by Finite Element Modeling Trans. NAMRI/SME May 21-23 Ann Arbor, MI 24 137 142
- Yellup, J.M. 1984 Modeling of Sheet Metal Flow Through a Drawbead Proc. 13th Biennial Congress of IDDRG Feb. 20-25 Melbourne, Australia 167 177
- Yellup, J.M. Painter M.J. 1985 The Prediction of Strip Shape and Restraining Force for Shallow Drawbead Systems J. Applied Metal Working 4 1 30 38
- Zharkov, V.A. 1995 Theory and Practice of Deep Drawing MEP Limited London
- Zonker, H.R. Whittle N.C. Hoffman R.A. Teichman M.M. 1996 Tool Material Performance during Draw Bead Deformation of Aluminum Sheet SAE Paper No. 960820