This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Analysis of Combustion Chamber Temperature and Heat Flux in a DOHC Engine
Annotation ability available
Sector:
Language:
English
Abstract
Cylinder head and piston temperatures and heat fluxes were measured in a DOHC engine. Measurements for the combustion chamber were made at different engine speeds and engine loads. Twenty-one instantaneous temperature probes were totally embedded in a cylinder head and a piston. Major conclusions of this research include; 1) the instantaneous temperature on the cylinder head was affected by flame traveling distance, gas flow characteristics, and cooling passage; 2) all temperatures at the exhaust valve heads with different engine loads are much higher than those at the intake valve heads; 3) the instantaneous surface temperature at around exhaust valve pocket is higher than that at piston crown center; 4) the instantaneous temperatures of the top-ring groove and the second land are also varied; and 5) heat flux in the piston crown is largely occurred during the expansion stroke and the heat flux has dissimilar trend to the temperature distribution.
Recommended Content
Authors
Citation
Choi, G., Choi, K., Lee, J., Song, Y. et al., "Analysis of Combustion Chamber Temperature and Heat Flux in a DOHC Engine," SAE Technical Paper 970895, 1997, https://doi.org/10.4271/970895.Also In
Diesel Engine Combustion Processes and Emission Control Technologies
Number: SP-1246; Published: 1997-02-24
Number: SP-1246; Published: 1997-02-24
References
- Ranchandani M. Whitehouse N. D. “Heat Transfer in a Piston of a Four Stroke Diesel Engine,” SAE paper 760007 1 9 1976
- Mure Cliff R. Rhee K. T. “Instantaneous Heat Transfer over the Piston of a Motored Direct Injection - Type Diesel Engine,” SAE paper 890469 165 179 1989
- Myers Martin R. “Damage Accumulation During High Temperature Testing of a Squeeze Formed Aluminium Piston Alloy,” SAE paper 900132 1 8 1990
- Newman B. A. Mierbach A. Tarabad G.E. “Heat Flow Through Poston Rings and Its Influence on shape,” SAE paper 831283 25 37 1983
- Heywood John B. “Internal combustion engine fundamentals,” 692 694 1988
- Wu H. Chiu C. “A Study of Temperature Distribution in a Diesel Piston Comparison of Analytical and Experimental Results,” SAE paper 861278 271 281 1986
- Enomoto Y. “Measurement of Heat Flux and Heat Transfer Coefficient on Combustion Chamber Wall” Jourmal of the Society of Automotive Japan 39 11 1270 1278 1985
- Enomoto Y. “A Study on the Thermocouple for Measurement of Instantaneous Combustion Chamber Wall Temperature in Internal Combustion Engine,” JSME 50 455 1353 1362 1984
- Enomoto Y. Furuhama S. “Study on Thin Film Thermocouple for Measuring Instantaneous Temperature on Surface of Combustion Chamber Wall in Internal Combustion Engine,” Bulletin of JSME 24 235 108 116 1985
- Lee Y. J. Lee S. Y. “A Measurement of Piston Surface Temperature by Using Instantaneous Temperature Measuring Probe,” KSAE 12 6 60 66 1990
- Assanis N. Friedmann F. “A Telemetry Linkage System for Piston temperature Measurements in a Diesel Engine,” SAE paper 910299 1 12 1991
- Enomoto Y. Nagano H. Koyama T. “Measurement of Wall Surface Temperature in a Combustion Chamber in Automobile 4-Stroke Engines,” IMechE 575 585 1995
- Ryu Y. Wei S. H. Song Y.S. Choi G.H. Lee J.T. “Measurement of Surface Wall Temperature and Heat Flux at Piston in the Marine Diesel Engine” KSME 96380126 349 355 1996