This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Round-Robin Evaluation of a New Standard Laboratory Test for Cosmetic Corrosion
Annotation ability available
Sector:
Language:
English
Abstract
A new, standard laboratory test (SAE J 2334) for evaluation of the cosmetic corrosion resistance of autobody steel sheet has been developed through the joint efforts of SAE's Automotive Corrosion Prevention Committee (SAE/ACAP) and the Auto/Steel Partnership's (A/SP) Corrosion Task Force. Results from this test give an excellent correlation with those of on-vehicle tests conducted in Montreal, Quebec, and St. John's, Newfoundland. To establish the precision of the new test, nine laboratories participated in a round-robin evaluation. Each laboratory tested ten standard, painted automotive steel sheet products. The results of this work are analyzed in terms of within-lab repeatability and lab-to-lab reproducibility, and they are an important and final milestone in the development and specification of the new test
Recommended Content
Authors
Citation
Townsend, H. and McCune, D., "Round-Robin Evaluation of a New Standard Laboratory Test for Cosmetic Corrosion," SAE Technical Paper 970734, 1997, https://doi.org/10.4271/970734.Also In
References
- Townsend, H. E. “Development of an Improved Laboratory Corrosion Test by the Automotive and Steel Industries,” Advanced Coatings Technology, Proceedings of the fourth Annual ESD Advanced Coatings Conference The Engineering Society Ann Arbor, Mich. 1994 29 49
- Roudabush, L. A. Townsend, H. E. McCune, D. C. “Update on the Development of an Improved Cosmetic Corrosion Test by the Automotive and Steel Industries,” Automotive Corrosion and Prevention Conference Proceedings, P-268 Society of Automotive Engineers Warrendale, Pa. 1993 53 63
- Townsend, H. E. “Accelerated Corrosion Testing: A Cooperative Effort by the Automotive and Steel Industries,” Proceedings of the Symposium on Corrosion-Resistant Automotive Sheet Steels ASM Materials Congress ASM International Metals Park, Ohio 1988 55 67
- Townsend, H. E. “Status of a Cooperative Effort by the Automotive and Steel Industries to Develop a Standard Accelerated Corrosion Test,” Automotive Corrosion and Prevention Conference Proceedings, P-228 Society of Automotive Engineers Warrendale, Pa. 1989 133 145
- Townsend, H. E. Granata, R. D. McCune, D. C. Schumacher, W. A. Neville, R. J. “Progress by the Automotive and Steel Industries Toward an Improved Laboratory Cosmetic Corrosion Test,” Automotive Corrosion and Prevention Conference Proceedings, P-250 Society of Automotive Engineers Warrendale, Pa. 1991 73 97
- Stephens, M. L. “SAE ACAP Division 3 Project: Evaluation of Corrosion Test Methods,” Automotive Corrosion and Prevention Conference Proceedings, P-228 Society of Automotive Engineers Warrendale, Pa. 1989 157 164
- Lutze, F. W. Shaffer, R. J. “Accelerated Atmospheric Corrosion Testing of AISI Panels,” Automotive Corrosion and Prevention Conference Proceedings, P-250 Society of Automotive Engineers Warrendale, Pa. 1991 115 127
- Petschel, M. “Statistical Evaluation of Accelerated Corrosion Tests and Correlation with Two-Year On-Vehicle Tests,” Automotive Corrosion and Prevention Conference Proceedings, P-250 Society of Automotive Engineers Warrendale, Pa. 1991 179 203
- Davidson, D. D. Schumacher, W. A. “An Evaluation and Analysis of Commonly Used Accelerated Cosmetic Corrosion Tests Using Direct Comparisons with Actual Field Exposure,” Automotive Corrosion and Prevention Conference Proceedings, P-250 Society of Automotive Engineers Warrendale, Pa. 1991 205 219
- Ostermiller, M. R. Townsend, H. E. “On-Vehicle Cosmetic Corrosion Testing of Coated and Cold-Rolled Steel Sheet,” Automotive Corrosion and Prevention Conference Proceedings, P-268 Society of Automotive Engineers Warrendale, Pa. 1993 65 83
- Granata, R. D. Moussavi-Madani, M. “Characterization of Corrosion Products and Corrosion Mechanisms on Automotive Coated Steels Subjected to Field and Laboratory Exposure Tests,” Lehigh University Report to the AISI Corrosion Task Force January 10 1996
- “Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method,” Annual Book of Standards American Society for Testing and Materials West Conshohocken, Pa.
- “Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods,” Annual Book of Standards American Society for Testing and Materials West Conshohocken, Pa.