This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Transferability of Material Data for the Example of a Randomly Loaded Forged Truck Stub Axle
Annotation ability available
Sector:
Language:
English
Abstract
For the development of new components, design engineers today have access to a broad amount of fatigue data, which were obtained from unnotched and notched specimens. These data can be transformed when the conditions of material, strength, geometry, surface and surface layer and loading mode in the fatigue critical areas are taken into account for constant and variable amplitude loading. The procedure of data transferability is discussed for the example of a randomly loaded truck stub axle where the failure criterion is the first detectable crack, and the local equivalent stress/strain and the maximum stressed/strained material volume are considered. In addition, several problems associated with fatigue life assessment under variable amplitude loading are discussed.
Recommended Content
Authors
Citation
Sonsino, C., Kaufmann, H., and Grubišić, V., "Transferability of Material Data for the Example of a Randomly Loaded Forged Truck Stub Axle," SAE Technical Paper 970708, 1997, https://doi.org/10.4271/970708.Also In
References
- Oppermann, H. Bender, H.-J. Bubenhagen, H. Johna-Lin, E. (FALIXS - A System for Experts to Predict the Fatigue Life of Automotive Components) Berlin 1993 189 205
- Köttgen, V.B. Seeger, T. (CAFE - A Program System to Evaluate Fatigue Strength under Operational Conditions) Berlin 1993 207 218
- Grubišić, V. Rupp, A. (Assessment of Forged Components with the Aid of the Local Strain Concept) 1992
- Grubišić, V. Sonsino, C.M. Influence of Local Strain Distribution on the Low-Cycle Fatigue Behaviour of Thick-Walled Structures 1982 612 629
- Grubišić, V. Fischer, G. Sonsino, C.M. (Weight Optimization and Rupture Behaviour of Forged Automotive Components) 1988 153 170
- Sonsino, C.M. Fatigue Design of Sintered Connecting Rods Part I: Metal Powder Report 43 1988 5 332 337 Part II: Metal Powder Report 45 1990 6 408 412
- Sonsino, C.M. Esper, F.J. (Assessment Criteria for Cyclically Stressed Components Made of Sintered Steel) 1985 1 1 10
- Buxbaum, O. Sonsino, C.M. (Operational Fatigue Strength Assessment of Components of Sintered Steel and their Safety) 1989 331 361 Powder Metallurgy International 22 1990 1 49 52 2 59 64
- Sonsino, C.M. (Viewpoints on Assessment of Thermal Highly Stressed Casted Components for the example of a Brake Disk) 44 1986
- Sonsino, C.M. Pfohl, R. Multiaxial Fatigue of Welded Shaft-Flange Connections of Stirrers under Random Non-Proportional Torsion and Bending International Journal of Fatigue 12 1990 5 425 431
- Schütz, W. (The Transferability of Material Fatigue Data on Component Properties) 1991 167 188
- Sonsino, C.M. (The Influence of Residual Stresses, Weld Geometry and Multi-Axial Stress States on the Operational Fatigue Strength of Welded Constructions Made of Structural Steels) 1994 3 97 109
- Sonsino, C.M. Lipp, K. Wiebelhaus, W. Piepenbreier, E. (Establishment of the Operational Fatigue Strength of Cast Aluminum Gear Box Housings for Railway Vehicles) Berlin 1993 107 120
- Bergmann, J.W. Heuler, P. Hück, M. (Transferability and Fatigue Life Prediction) Berlin 1993 153 168
- Liu, J. Jung, A. Esderts, A. (Suggestions for Improvements to Fatigue Life Prediction under Random Stresses, Overloads, and Combined Stresses) Berlin 1993 255 270
- Grubišić, V. Rupp, A. (Comparison of Experimental and Calculated Fatigue Lives of Components and Specimens) Berlin 1993 271 291
- Sonsino, C.M. (Assessment of Fatigue Behaviour of Components with the Aid of Local Stresses) 1993 1 25 33
- Sonsino, C.M. (Fatigue Strength of Welded Joints under Combined In-Phase and Out-of-Phase Multi-Axial Stresses) 1994 9 353 368
- Brandt, U. Sonsino, C.M. (Fatigue Life Prediction for Casted Turbine Wheels Considering Short Cracks for the Example of the Nickel Based Alloy IN 713 C) 1994 211 238
- Schütz, W. (Fatigue Life Prediction for Cyclically Stressed Components) Berlin 1980 341 405
- Schütz, W. (From Material Data to Component - Wishes and Realities) Berlin 1988 9 51
- Bergmann, J.W. Heuler, P. (Transferability - A Central Problem of Fatigue Life Prediction of Cyclically Loaded Components) 1994 1 3 10
- Krä, Chr. Heckel, K. (Transfer of Fatigue Data with the Statistical Size Effect) 1989 8 255 261
- Heckel, K. Krä, C. (The Meaning of Scatter to the Transferability of Operational Fatigue Strength Data) Berlin 1989 305 328
- Boller, C. (The Influence of Specimen Size and Surface Roughness on the Fatigue Life Prediction with Regard to Local Stresses) 1988
- Kloos, K.-H. Fuchsbauer, B. Magin, W. Zankov, D. (Transferability of Specimen Fatigue Strength Properties to Components) 1979 59 72
- Sonsino, C.M. Kaufmann, H. (Influences on the Fatigue Strength of Die-Forged Parts - Construction, Manufacturing and Material Dependent Parameters) 1991 4 131 143
- Grubišić, V. Sonsino, C.M. (Influences on the Fatigue Strength of Forged Components) 1992 11 105 112
- Kaufmann, H. Sonsino, C.M. Buxbaum, O. (Fatigue Behaviour of Forged Components with Induction Hardened Surface Layer under Constant and Variable Amplitude Loading) 1991
- Buxbaum, O. (Fatigue Strength under Operational Conditions - Safety and Economic Assessment of Cyclically Loaded Components) 1992 2
- Siebel, E. Stieler, M. (Non-Uniform Stress Distribution under Cyclic Loading) 1955 5 121 126
- Kloos, K.H. (Influence of the Surface State and the Specimen Size on the Fatigue Properties) 1976 63 76
- Kloos, K.H. (Size Effect and Endurance Limit Properties under the Special Consideration of an Optimized Surface Treatment) 1981 4 134 142
- Magin, W. (Assessment of the Geomerical Size Effect Using the Concept of the Normalized S-N Curve) 1981 8 323 326
- Phillips, C.E. Heywood, R.B. The Size Effect in Fatigue of Plain and Notched Steel Specimens Loaded under Reversed Stress Proc. Instn. Mech. Engrs. 1951 65 113 124
- Hempel, M. (The State of the Knowledge about the Influence of Specimen Size on the Endurance Limit) 1957 9 385 394
- Kuguel, R. A Relation between Theoretical Stress Concentration Factor and Fatigue Notch Factor Deduced Concept of Highly Stressed Volume ASTM Proceedings 61 1961 732 748
- Braune, F.G. (Collection of Formulas to Calculate the Fatigue Notch Factor and Similar Fatigue Life Relationships under Tensile/Compression and Bending Alternating Loadings) 1965 5 193 199
- Neuber, H. (Notch Stress Theory, Theory of the Stress Concentration, Exact Calculation of the Strength) Springer Verlag Berlin, Heidelberg, New York, Tokio 1985
- Fatigue Design Handbook Advances in Engineering 4 Society of Automotive Engineers, Inc. New York 1968
- Smith, K. N. Watson, P. Topper, T. H. A Stress-Strain Function for the Fatigue of Metals Journal of Materials 5 1970 4 767 778
- Störzel, K. Sonsino, C.M. Schöpfel, A. Buxbaum, O. (Methods of Fatigue Life Prediction Based on the Rainflow Matrices of Local Strains) 1994
- Schütz, D. Oppermann, H. (Critique and improvement of Fatigue Life Prediction Methods) Berlin 1993 219 238
- Schütz, W. (A Relationship between the Fatigue Life under Constant and Variable Amplitude Loading and its Application to the Assessment of Aircraft Components) 1967 11 407 419
- Palmgren, A. (The Fatigue Life of Roller Bearings) 1924 14 339 341
- Miner, M. A. Cumulative Damage in Fatigue Journal of Applied Mechanics 12 1945 3 A159 A164
- Haibach, E. (Modified Linear Damage Accumulation Hypothesis Considering the Decrease of the Endurance Limit with Propagating Damage) 50 70 1970
- Haibach, E. (Fatigue Strength under Operational Conditions - Procedures and Data in the Fatigue Life Assessment of Components) 1989
- Zacher, P. Seeger, T. (FILIPP - PC Program for Fatigue Life Prediction using the Local Concept)
- Vormwald, M. (Crack Initiation Life Prediction on the Basis of Fracture Mechanics for Short Cracks) 1989
- Vormwald, M. The Consequences of Short Crack Closure on Fatigue Crack Growth under Variable Amplitude Loading Fatigue and Fracture of Engineering Materials and Structures 14 2 3 1991 205 225
- Savaidis, G. Seeger, T. (Stress-Strain and Fatigue Life Analyses on Specimens of 42 CrMo 4 under Two-Step Bending) 1994 4 141 151
- Dowling, N.E. Iyyer, N.S. Fatigue Crack Growth and Closure at High Cyclic Strains Materials Science and Engineering 96 1987 99 107
- Lipp, W. Svenson, O. (Contribution to a Simpler Representation of Stresses with Changing Mean Values in Fatigue Testing) 1967
- Liu, J. (Contribution to the Improvement of Fatigue Life Assessment under Multi-Axial Stresses) 1991
- Kaufmann, H. Sonsino, C.M. Buxbaum, O. (The Influence of Construction, Manufacturing and Material Dependent Parameters on the Optimization of Die-Forged Parts under Variable Amplitude Loading) 1989
- Kaufmann, H. Sonsino, C.M. (Transferability of Fatigue Data from Unnotched and Notched Specimens for the Example of Forged Truck Connecting Rods and Truck Stub Axles) 1994 239 276
- Schütz, D. Lowak, H. (The Use of Assessment Data from Experimental Tests under Similar Operational Load Sequences for Fatigue Life Prediction) 1976