This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Direct Fuel Injection - A Study of Injector Requirements for Different Mixture Preparation Concepts
Annotation ability available
Sector:
Language:
English
Abstract
The first part of the paper outlines the main potential advantages of the direct fuel injection concept and describes the overall layout of a system in which the keystones are a piston rotary fuel delivery pump with integrated pressure regulation and electromechanical fast responding fuel injectors. Three different nozzle designs are discussed, a divergent pintle solid cone, a pintle hollow cone swirl layout and a closed cap multijet design.
In the second part of the paper the used experimental high pressure dynamic test equipment is discussed. Then the results obtained by the use of phase illuminated visualisation techniques and phase Doppler analysis as well as by a 3D CFD approach are presented.
The paper concludes by relating the spray patterns and the associated droplet penetration velocities, produced by the different nozzle types, to the combustion chamber layout and to the possible manufacturing precision requirements for each nozzle type.
Recommended Content
Authors
Citation
Pontoppidan, M., Gaviani, G., Bella, G., and Rocco, V., "Direct Fuel Injection - A Study of Injector Requirements for Different Mixture Preparation Concepts," SAE Technical Paper 970628, 1997, https://doi.org/10.4271/970628.Also In
References
- Allocca L. Corcione F. E. Golloni S. Papetti F. “Measurement and Modelling of Spray/Wall Dynamics and Heat Transfer.” 3rd. Int. Kiva Users Meting - SAE Congress Detroit Mi 1993
- Amsden A. A. O'Rourke P. J. Butler T. D. “Kiva II - A computer program for Chemically Reactive Flows with Spray.” Los Alamos Labs 1989
- Amsden A. A. “Kiva III: A Kiva Program with Block-Structured Mesh for Complex Geometries.” Los Alamos Labs 1993
- Chew T. J. C. Weiss R. R. “Injector flow Hydraulic Flip Behaviour for Typical Liquid Rocket Operating Regimes.” 9th. JANNAF Combustion Meeting II 1972
- De Maio A. University of Rome 1995
- “Engineering Analysis Gridding Environment CAD based Multiblock Grid Generation.”
- Guerrassi N. Champoussin J. C. “Experimental Study and Modelling of Diesel Spray/Wall Impingement.” SAE Paper 960864
- IBM/Dassault System Computer Graphics Aided Three Dimensional Application
- IBM Visualisation Data Explorer Programmers Reference 6th
- Kang, Huh Y. Ping I. Chang, Jay K. Martin “A Comparison of Boundary Layer Treatments for Heat Transfer in IC Engines.” SAE Paper 900252
- Kuma T. Iwamoto Y. Iida K. Murakami M. Akishina K. Anda H. “Combustion control Technologies for Direct Injection SI Engine.” SAE paper 960600
- Mendonca F. G. Bretton A. S. “Simulation of in-cylinder fuel mixing in large spark ignition lean burn engine.” ImechE 1993
- Naber J. D. Reitz R. D. “Modelling Spray/Wall Impingement.” SAE Paper 880107
- Pontoppidan M. “A Phenomenological Approach to the Study of some of the Basic Aspects of 3-D Motional Gas Core Behaviour inside the Inlet Manifold of an IC-Engine.” FISITA Congress 1990 Torino paper nr. 905041 II
- Pontoppidan M. “Improvement of Optimisation Procedure for a S.I.-Engine Intake System using integrated Numerical and Mechanical Simulators.” ImechE London 1991
- Pontoppidan M. Cristiani C. “Consequences of Atomisation Improvement of Port Injectors by Air-Shrouding - Theory and Industrial Solution.” SAE paper 930322
- Pontoppidan M. Cristiani C. “Analysis of Mixture Preparation Quality versus the use of different types of Passively Air-assisted Fuel Port Injectors.” ATA 94A1095 - 1994 Convention Firenze 769 782
- Pontoppidan M. “Streamline Visualisation by Laser Sheet Imaging - A Useful Complementary Optimisation Tool for Intake Manifold Design.” SAE paper 950101
- Pontoppidan M. Bella G. Rocco V. “Mixture formation in SI-Engine intake Systems - A simplified theoretical Model with Experimental Verification.” ASME 1996 Spring Congress
- Reitz R. D. “Assessment of Wall Heat Transfer Models for Premixed-charge Engine Combustion Computations.” SAE Paper 910267
- Soterioli C. C. E. “Cavitation hydraulic flip and atomisation in direct diesel sprays.” IMechE 1993