Refinement of Heat Release Analysis

Authors

• A. K. Oppenheim - University of California, Berkeley
• J. E. Barton - University of California, Berkeley
• A. L. Kuhl
• W. P. Johnson

Topic

• Combustion and combustion processes
• Spark ignition engines
• Thermodynamics

Citation

Also In

References

1. Amann, C.A. 1985 Cylinder pressure measurement and its use in engine research SAE Paper 852067
2. Annand, W. J. D. 1963 Heat transfer in the cylinders of reciprocating internal combustion engines Proceedings of the Institution of Mechanical Engineers 177 36 973 996
3. Annand, W. J. D. Ma, T. H. 1970 Instantaneous heat transfer rates to the cylinder wall surface of a small compression-ignition engine Proceedings of the Institution of Mechanical Engineers 185 976 987
4. Arcoumanis, C. Hull, D.R. Whitelaw, J.H. 1949 An approach to charge stratification in lean-burn, spark-ignition engines SAE Paper 941878 13
5. Benson, R. A. 1962 The thermodynamics and gas dynamics of internal-combustion engines Horlock J. H. Winterbone D. E. I 582 Clarendon Press Oxford
6. Beretta, G.P. Keck, J.C. 1983 Energy and entropy balances in a combustion chamber: analytical solution Combustion Science and Technology 30 19 29
7. Beretta, G.P. Rashidi, M. Keck, J.C. 1983 Turbulent flame propagation and combustion in spark ignition engines Combustion and Flame 52 217 245
8. Blizard, N. C. Keck, J. C. 1974 Experimental and theoretical investigation of turbulent burning model for internal combustion engines SAE Paper 740191 18
9. Blumberg, P. N. Kummer, J. T. 1971 Prediction of NO formation in spark ignited engines: an analysis of methods of control Combustion Science and Technology 4 73 95
10. Blumberg, P. N. Lavoie, G. A. Tabaczynski, R. J. 1979 Phenomenological models for reciprocating
11. Borman, G. Nishiwaki, K. 1987 Internal-combustion engine heat transfer Prog. in Energy and Combustion Science 13 1 16
12. Bracco, F.V. 1974 Introducing a new generation of more detailed and informative combustion models SAE Paper 741174 23 16 21
13. Bracco, F.V. 1980 Scaling of some flow fields with flames Combustion Modeling in Reciprocating Engines Mattavi J. N. Amann C. A. New York Plenum Publishing Corp. 299 325 306 309
14. Bradley, D. Mitcheson, A. 1976 Mathematical solutions for explosions in spherical vessels Combustion and Flame 26 201 217
15. Chen, S.K. Chang, T.Z. Chang, J.S. Bair, R. 1988 On-line PC based engine analyzer and simulator SAE Paper 881256 29
16. Chen, S.K. 1994 Engine cycle analyzer PEI/Engine Tech™ Series 63
17. Chun, K. M. Heywood, J. B. 1987 Estimating heat-release and mass-of-mixture burned from spark-ignition engine pressure data Combust. Sci. and Tech. 54 133 143
18. Ferguson, C.R. Green, R.M. Lucht, R.P. 1987 Un-burned gas temperatures in an internal combustion engine. II: Heat release computations Combustion Science and Technology 55 63 81
19. Ferguson, C.R. 1986 Internal combustion engines Wiley & Sons New York
20. Flamm, L. Mache, H. 1917 Combustion of an explosive gas mixture within a closed vessel Berichte, Wien Akad. Wissenschaften 26 9
21. Flynn, P. Mizusawa, M. Uyehara, O. A. Myers, P. S. 1972 An experimental determination of the instantaneous potential for radiant heat transfer within an operating diesel engine SAE Paper 720022
22. Foster, D.E. 1985 An overview of zero-dimensional thermodynamic models for IC engine data analysis SAE Transactions, Paper 852070 436 449
23. Gatowski, J.A. Balles, E.N. Chun, K.M. Nelson, F.E. Ekchian, J.A. Heywood, J.B. 1984 Heat release analysis of engine pressure data SAE Paper 841359
24. Gavillet, G.G. Maxson, J.A. Oppenheim, A.K. 1993 Thermodynamic and thermochemical aspects of combustion in premixed charge engines revisited SAE Paper 930432 19
25. Hauser, G. Heitland, H. Wislocki, K. 1995 Can the no-man's land between Diesel and Otto engines be bridged? Futuristic Concepts in Engines and Components SP-1108, SAE Paper 951962 31 38
26. Heitland, H. 1994 Alternativen im Verkehr Akademia-Verlag Poznan, Polen 158
27. Heitland, H. Rinne, G Wislocki, K. 1994 55 2 1 8
28. Heywood, J. B. 1980 Engine combustion modeling - an overview Combustion Modeling in Reciprocating Engines Mattavi J. N. Amann C. A. New York Plenum Publishing Corp. 1 38
29. Heywood, J. B. 1988 Internal combustion engine fundamentals McGraw-Hill Book Company New York 930
30. Heywood, J. B. Higgins, J. M. Watts, P. A. Tabaczynski, R. J. 1979 Development and use of a cycle simulation to predict s. i. engine efficiency and NOx emissions SAE, Paper 790291
31. Hiraki, H. Rife, J. M. 1980 Performance and NOx model of a direct injection stratified charge engine SAE Paper 800050 21
32. Horlock, J. H. Winterbone, D. E. 1986 The thermodynamics and gas dynamics of internal combustion engines Clarendon Press Oxford II 583 1237
33. Jost, W. 1946 Explosion and combustion processes in gases McGraw-Hill Book Company New York London 621
34. Krieger, R. B. Borman, G. L. 1966 The computation of apparent heat release for internal combustion engines ASME 66-WA/DGP-4 16
35. Kumar, S. Chalko, T.J. Watson, H.C. 1993 FLOCOM - New code for the solution of the flow and combustion in s.i. engines Ninth International Pacific Conference on Automotive Engineering Phoenix, Arizona
36. Lancaster, D.R. Krieger, R.B. Lienesch, J.H. 1975 Measurement and analysis of engine pressure data SAE Trans. 84 Paper 750026 155 172
37. Lavoie, G. A. Heywood, J. B. Keck, J. C. 1970 Experimental and theoretical investigation of nitric oxide formation in internal combustion engines Combustion Science and Technology 1 313 326
38. Lewis, B. von Elbe, G. 1987 Combustion, flames and explosion of gases 15 Combustion Waves in Closed Vessels 381 395 Academic Press, Inc. New York Third 739
39. Meintjes, K. 1987 A user's guide for the GM engine-simulation program GM Research Publication 17
40. Metghalchi, M. Keck, J.C. 1980 Laminar burning velocity of propane-air mixtures at high temperature and pressure Combustion and Flame 38 143 154
41. Metghalchi, M. Keck, J.C. 1982 Burning velocities of mixtures of air with methanol, isooctane and at high pressure and temperature Combustion and Flame 48 191 210
42. Morel, T. Keribar Blumberg, P. N. 1988 A new approach to integrating engine performance and component design analysis through simulation SAE Paper 880131 24
43. Myers, P. 1985 The art of choosing a model SAE Paper 850341 Engine combustion analysis new approaches SAE Warrendale, PA 1 14
44. Maxson, J. A. Hensinger, D. M. Hom, K. Oppenheim, A. K. 1991 Performance of multiple stream pulsed jet combustion systems SAE Paper 910565 9
45. Obert, E. F. 1973 Internal combustion engines and air pollution Harper and Row, Publishers New York 740
46. Oppenheim, A. K. 1985 Dynamic features of combustion Phil. Trans. R. Soc., Lond. A315 471 508
47. Oppenheim, A.K. 1988 Quest for controlled combustion engines SAE Transactions, The Journal of Engines 97 6 1033 1039
48. Oppenheim, A. K. 1992 Life on earth at the point of inflection & The future of combustion in engines Proceedings of the Institution of Mechanical Engineers IMechE 215 220 187 192
49. Oppenheim, A.K. 1993 Aerodynamic control of combustion Journal of Fluids Engineering 115 4 561 567
50. Oppenheim, A. K. Beltramo, J. Faris, D. W. Maxson, J. A. Hom, K. Stewart, H. E. 1989 Combustion by pulsed jet plumes-key to controlled combustion engines SAE Transactions, The Journal of Engines 98 175 182
51. Oppenheim A.K. Kuhl A.L. 1995 Paving the way to controlled combustion engines (CCE) Futuristic Concepts in Engines and Components SP-1108, SAE Paper 951961 19 29
52. Oppenheim A.K. Kuhl A.L. Packard A.K. Hedrick J.K. Johnson W.P. 1996 Model and control of heat release in engines Engine Combustion and Flow Diagnostics, SP-1157, SAE Paper 960601 15 23
53. Oppenheim, A. K. Maxson, J. A. 1991 Thermodynamics of combustion in an enclosure Progress in Astronautics and Aeronautics American Institute of Aeronautics and Astronautics New York 365 382
54. Oppenheim, A.K. Maxson, J.A. 1994 A thermochemical phase space for combustion in engines Twenty-Fifth Symposium (International) on Combustion The Combustion Institute Pittsburgh, Pennsylvania 157 165
55. Oppenheim, A.K. Maxson, J.A. Shahed S.M. 1994 Can the Maximization of Fuel Economy be Compatible with the Minimization of Pollutant Emissions? SAE Paper 940479 12
56. Oppenheim, A. K. Maxson, J. A. Wilcutts, M. A. Faris, D. W. Packard, A. K. Hedrick, J. K. 1993 Fireball Mode of Combustion and Its Adaptive Control Twenty-Sixth International Symposium on Automotive Technology and Automation Aachen, Germany 7
57. Pischinger, R. 1989 Springer Verlag
58. Reynolds, W.C. 1986 STANJAN Interactive Computer Programs for Chemical Equilibrium Analysis Department of Mechanical Engineering, Stanford University Stanford, California 48
59. Reynolds, W. C. 1987 Engine Simulation Program Department of Mechanical Engineering, Stanford University Stanford, California 8
60. Rhodes, D.B. Keck, J.M. Laminar burning speed measurements of indolene-air-diluent mixtures at high pressures and temperatures SAE Paper 850047 13
61. Shayler, P. J. Wiseman, M. W. Ma, T. 1990 Improving the Determination of Mass Fraction Burnt SAE Paper 900351 8
62. Stull, D.R. Prophet H. 1971 JANAF Thermochemical Tables National Bureau of Standards National Institute of Standards and Technology US Department of Commerce 1141
63. Taylor, C.F. 1985 The internal combustion engine in theory and practice MIT Press Cambridge, Massachusetts 1 Thermodynamics, Fluid Flow, Performance 2nd 1985 574 2 th 1982 Combustion, Fuels, Materials, Design 783
64. Watson, N. Marzouk, M. 1977 A non-linear digital simulation of turbocharged diesel engines under transient conditions SAE Paper 770123
65. Winterbone, D.E. Benson, R.S. Closs, G.D. Mortimer, A.G. 1976 A comparison between experimental and analytical transient test results for a turbocharged diesel engine Proc.I.Mech.E. 190 267 276
66. Williams, F.A. 1985 Combustion Theory The Benjamin/Cummings Publishing Company Menlo Park, California second 680
67. Withrow, L Rassweiler, G.M. 1936 Slow motion shows knocking and non-knocking explosions SAE Transactions 39 297 303
68. Woschni, G. 1968 A universally applicable equation for the instantaneous heat transfer coefficient in the internal combustion engine SAE Paper 670931
69. Woschni, G. Anisito, F. 1974 Experimental investigation and mathematical representation of the rate of heat release in diesel engines dependent on engine operating conditions SAE Paper 740086
70. Zel'dovich, Ya. B. Barenblatt, G. I. Librovich, V. B. Makhviladze, G. M. 1980 The mathematical theory of combustion and explosions Combustion in Closed Vessels, The Mache Effect 470 487 1985 McNeill D. H. Consultants Bureau New York and London 597 Nauka of the USSR Academy of Sciences Moscow 478

Cited By