This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Simulation Study of Effects of Injection Rate Profile and Air Entrainment Characteristics on D.I. Diesel Combustion
Annotation ability available
Sector:
Language:
English
Abstract
A calculative investigation was performed in order to examine the effects of injection rate profile and air entrainment characteristics on exhaust emission using a phenomenological spray combustion model. The calculations were made of an engine with a bore of 114 mm and a stroke of 130 min while changing the injection rate profile and the air entrainment characteristics. As a result of the calculations, effective measures were found for simultaneous reduction of NOx and smoke emissions.
Recommended Content
Authors
Citation
Imanishi, H., Yoshizaki, T., and Hiroyasu, H., "Simulation Study of Effects of Injection Rate Profile and Air Entrainment Characteristics on D.I. Diesel Combustion," SAE Technical Paper 962059, 1996, https://doi.org/10.4271/962059.Also In
References
- IKEGAMI M. MIWA K. NAKAYAMA Y. Study of Diesel Particulates by Dilution Tunnel Method Trans. JSME. 50-451 1984 753
- Lapuerta M. Salavert J. M. Domenech C. Modelling and Experimental Study About the Effect of Exhaust Gas Recirculation on Diesel Engine Combustion and Emissions SAE Paper No. 950216
- Arcoumanis C. Bae C. Nagwaney A. Whitelaw J. H. Effect of EGR on Combustion Development in a 1.9L DI diesel Optical Engine SAE Paper No. 950850
- Uchida N. Daisho Y. et al. Combined Effects of EGR and Supercharging on Diesel Combustion and Emissions SAE trans., Paper No. 930601
- Dolenc A. Waras H. High Pressure Fuel System for High Speed DI Diesel Engines with Suitable Electronic Control SAE trans.,SAE Paper No. 942293
- Kobayashi S. Sakai T. et al. Measurement of Flame Temperature Distribution in D.I. Diesel Engine with High Pressure Fuel Injection SAE trans., Paper No. 920692
- Nehmer D. A. Reitz R. D. Measurement of the Effect of Injection Rate and Split Injections on Diesel Engine Soot and NOx Emissions SAE trans., Paper No. 940668
- Tow T. C. Pierpont D. A. Reitz R. D. Reducing Particulate and NOx Emissions by Using Multiple Injections in a Heavy Duty D.I. Diesel Engine SAE trans., Paper No. 940897
- Bower G. R. Foster D. E. The Effect of Split Injection on Soot and NOx Production in an Engine-Fed Combustion Chamber SAE Paper No. 932655
- Hiroyasu, H. Kadota, T. Models for Combustion and Formation of Nitric Oxide and Soot in Direct Injection Diesel Engines SAE trans., Paper No. 760129
- Hiroyasu, H. Arai, M. FueI Spray Penetration and Spray Angle in Diesel Engines Trans. SAE Japan 21 1980 5
- Kadota, T. Hiroyasu, H. Evaporation of a single Droplet at Elevated Pressures and Temperatures (2nd Report, Theoretical Study) Trans. JSME. 42-365 1976 1216
- Kadota, T. Hiroyasu, H. et al. Ibnition Delay of a Fuel Droplet in High Pressure Gaseous Enuironment Trans. JSME. 41-348 1975 2475
- Technical Data, Formation Mechanisms and Controls of Pollutants in Combustion Systems JSME. 1980
- Baulish, D.L. Drysdale, D.D. et al. Evaluated Kinetic Data for High Temperature Reactions 1 2 1973 Butter worth, London