This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Shear Crack Issues Addressed by Split Mandrel and Automated Coldworking
Annotation ability available
Sector:
Language:
English
Abstract
Coldworking holes is an established manufacturing procedure in the aerospace industry. There are two coldworking methods used today: split-sleeve and split-mandrel. The intricate steps of these processes are not completely understood. There has been no investigation into the differences in the mechanisms of the two processes. Initial results from an ongoing program reveal that the differences in the mechanisms impart the split-mandrel process with advantages over the split-sleeve process, including the ability to coldwork 7000 series aluminum without shear cracking at the axial ridge, and the ability to effectively automate the process.
Topic
Citation
Weigel, M. and Leon, A., "Shear Crack Issues Addressed by Split Mandrel and Automated Coldworking," SAE Technical Paper 961886, 1996, https://doi.org/10.4271/961886.Also In
References
- Gran, R. J. Orazio, F. D. Paris, P. C. Irwin, G. R. Hertzberg, R. “Investigation and Analysis Development of Early Aircraft Structural Failures,” Wright-Patterson Air Force Base Ohio March 1971
- Finney, J. M. “Cold Expansion and Interference for Extending the Fatigue Life of Multi-layer Metal Joints,” Deaprtment of Defence - Defence Science and Technology Organisation Aeronatuical Research Laboratory Melbourne, Victoria, Australia 1993
- Stack, C. P. Stephens, R. I. “Effect of Split-Sleeve Cold Expansion on the Fatigue Resistance of Hot-rolled 1020 Steel,” International Journal of Fatigue 11 5 327 334 Butterworth and Co. Ltd. 1989
- Landy, M. A. Armen, H. Jr. Eidinoff, H. L. “Enhanced Stop-Drill Repair Procedure for Cracked Structures,” Fatigue in Mechanically Fastenened Composite and Metallic Joints. ASTM STP 927 Potter John M, American Society for Testing and Materials Philadelphia 1986
- Lam, Y. C. “A Comparative Study on the Effects of Interference Fit and Cold Expansion on the Fatigue Life of Cracked Holes “ Scripta Metallurgica et Materialia 28 191 193 Pergamon Press Ltd. USA 1993
- Arora, P. R. Dattaguru, B. Subramanya Hande, H. S. “The Fatigue Crack Growth Rate In L-72 Al-Alloy Plate Specimens with ColdWorked Holes,” Engineering Fracture Mechanics 42 6 989 1000 Pergamon Press Ltd. Great Britain 1992
- Heller, M. Jones, R. Williams, J. F. “Analysis of Cold-Expansion for Cracked and Uncracked Fastener Holes,” Engineering Fracture Mechanics 39 2 195 212 Pergamon Press Ltd. Great Britain 1991
- Ozelton, Malcom W. Coyle, Timothy G. “Fatigue Life Improvement by Cold Working Fastener Holes in 7050 Aluminum,” Fatigue in Mechanically Fastenened Composite and Metallic Joints, ASTM STP 927 Potter John M, American Society for Testing and Materials Philadelphia 1986
- Leon, Anthony “F-16 Fatigue Crack Growth Coldwork Tooling Evaluation Test Program,” August 1995
- Chandawanich, Nopporn Sharpe William N. Jr., “An Experimental Study of Fatigue Crack Initiation and Growth from Coldworked Holes,” Engineering Fracture Mechanics 11 609 620 Pergamon Press Ltd. Great Britain 1979
- Pell, R. A. Beaver, P. W. Mann, J. Y. Sparrow, J. G. “Fatigue of Thick-Section Cold-Expanded Holes with and without Cracks,” Fatigue and Fracture Engineering Materials and Structures 12 6 553 567 Fatigue of Engineering Materials Ltd. Great Britain 1989
- Wanlin, Guo “Elastic-plastic Analysis of a Finite Sheet with a Cold-Worked Hole,” Engineering Fracture Mechanics 46 3 465 472 Pergamon Press Ltd. Great Britain 1993
- Cathey, W. H. Grandt A. F. Jr., “Fracture Mechanics Consideration of Residual Stresses Introduced by Coldworking Fastener Holes,” Journal of Engineering Materials and Technology 102 85 91 American Society of Mechanical Engineers 1980
- Rich, D. L. Impellizzeri, L. F. “Fatigue Analsysis of Cold-Worked and Interference Fit Fastener Holes,” Cyclic Stress- Strain and Plastic Deformation Aspects of Fatigue Crack Growth, ASTM STP 637 American Society for Testing and Materials 1977
- Arora, P. R. Dattaguru, B. Subramanya Hande, H. S. “A Method for Estimation of the Radius of Elastic-Plastic Boundary Around Cold-Worked Holes,” Journal of Testing and Evaluation, JTEVA 20 5 369 375 American Society for Testing and Materials September 1992
- Kliman, V. Bílý, M. Prohácha, J. “Improvement of Faituge Performance by Cold Hole Expansion, Part 1: Model of Fatigue Limit Improvement,” International Journal of Fatigue 15 2 93 100 Butterworth-Heinemann Ltd. 1993
- Kliman, V. Bílý, M. Prohácha, J. “Improvement of Faituge Performance by Cold Hole Expansion, Part 2: Experimental Verificaiton of Proposed Model,” International Journal of Fatigue 15 2 101 107 Butterworth-Heinemann Ltd. 1993
- Hermann, R. “Three-Dimensional Stress Distribution Around Cold-Expanded Holes in Aluminum Alloys,” Engineering Fracture Mechanics 48 6 819 835 Elsevier Science Ltd. Great Britain 1994
- Yanishevsky, M. Guellec, S. Le. “CF116 Main LowerWing Skin Enhancement CouponTest Program,” Department of National Defense Canada
- Philliips Joseph, L. “Fatigue Improvement by Sleeve Coldworking,” SAE Paper 730905 Society of Automotive Engineers 1973
- Wieland, David H. Cutshall, Jon T. Burnside, O. Hal. Cardinal, Joseph W. “Analysis of Cold Worked Holes for Structural Life Extension,” FAA/NASA Symposium May 6 1994 Southwest Research Institute San Antonio, Texas 1994
- Weigel, Matthew Leon, Anthony Creager, Matthew “An Enhanced Method of Stop Drill Repair with Sleeveless Coldworking,” 1994 USAF Structrual integrity Program Conference December 6-8 1994 San Antonio, Texas West Coast Industries 1994
- Rodman, Geoffrey A. Creager, Matthew “Split Mandrel Coldworking: A Manufacturing Solution for Automating a Critical Process,” West Coast Industries Seattle, Washington 1993
- Mann, J. Y. Jost, G. S. “Stress Fields Associated with Interference Fitted and Cold-Expanded Holes with Particular Reference to the Fatigue Life Engancement of Aircraft Structural Joints,” Metals Forum 6 1 43 53 1983
- Finlayson, T. R. “Residual Stress Analysis: A Review Metals Forum 6 1 4 10 1983