This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Dynamic Testing of F-16 Bias and Radial Tire Deformation
Annotation ability available
Sector:
Language:
English
Abstract
This paper presents an optical technique called fringe projection to measure three dimensional tire deformation subjected to different loads, percentages of deflection and yaw angles. Unlike the well-known Moire method, the proposed technique uses a single light source and a grating, thus requiring no image superposition. As a result, the measurement is not as sensitive to vibration as the Moire method. The fringe projection also differs from the commonly used optical inspection technique in manufacturing industry via line scanning known as structured light, which cannot be applied to dynamic deformation measurements. The recently developed subpixel resolution was employed to accurately locate the optical fringe centers, which in turn improves the accuracy in 3-D geometry determination. A fiber-optic displacement sensor was also placed close to the tire sidewall in order to measure the deformational change of a selected reference point. Finally, the deformations are compared between F-16 bias and radial aircraft tires when subjected to the same static loading conditions. Although the dynamic tests had been completed, the results of image analysis are not yet available.
Recommended Content
Authors
Topic
Citation
Lin, P., Chawla, M., and Wagner, P., "Dynamic Testing of F-16 Bias and Radial Tire Deformation," SAE Technical Paper 961303, 1996, https://doi.org/10.4271/961303.Also In
References
- Lin, P. P. Parvin, F. 1990 “Edge Detection with Subpixel Resolution and its Application to Radius Measurement via Fringe Projection Technique,” SME Technical Paper 4 13 4 27
- Lin, P. P. Parvin, F. Schoenig, F. C. Jr. 1991 “Optical Gaging of Very Short-term Surface Waviness,” Transactions of NAMAR/SME 327 322
- Lin, P. P. Chawla, M. D. Ulrich, P. C. 1994 “Optical Technique for Measuring Tire Deformation and Strains - Preliminary Results,” SAE Technical Paper No. 941178 Aerospace Atlantic Conference and Exposition
- Lin, P. P. Chawla, M. D. Wagner, P. M. 1995 “Deformation Comparison between Bias and Radial Aircraft Tires Using Optical Techniques” SAE Technical Paper No. 951433 Aerospace Atlantic Conference and Exposition
- Lin, P. P. Kuo C. T. 1995 “Efficient Surface Geometry Measurement by Means of Optical Fringe Projection,” Manufacturing Science and Engineering 2-1 3-1 American Society of Mechanical Engineering 507 518
- Marr, D. Poggio, T. 1976 “Cooperative Computation of Stereo Disparity,” Science 194 283 287
- Vemuri, B. C. Aggarwal, J. K. 1984 “3-Dimensional Reconstruction of Objects from Range Data,” Proc. of 7th Int. Conf. on Pattern Recognition 1 752 755