This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Modelling of the Intake Manifold Filling Dynamics
Annotation ability available
Sector:
Language:
English
Abstract
Mean Value Engine Models (MVEMs) are dynamic models which describe dynamic engine variable (or state) responses as mean rather than instantaneous values on time scales slightly longer than an engine event. Such engine variables are the independent variables in nonlinear differential (or state) equations which can be quite compact but nevertheless quite accurate.
One of the most important of the differential equations for a spark ignition (SI) engine is the intake manifold filling (often manifold pressure) state equation. This equation is commonly used to estimate the air mass flow to an SI engine during fast throttle angle transients to insure proper engine fueling.
The purpose of this paper is to derive a modified manifold pressure state equation which is simpler and more physical than those currently found in the literature. This new formulation makes it easier to calibrate a MVEM for different engines and provides new insights into dynamic SI engine operation. The new model also provides information useful for EGR control.
Recommended Content
| Technical Paper | Mean Value Modelling of Spark Ignition Engines |
| Technical Paper | The Analysis of Mean Value SI Engine Models |
Authors
Citation
Hendricks, E., Chevalier, A., Jensen, M., Sorenson, S. et al., "Modelling of the Intake Manifold Filling Dynamics," SAE Technical Paper 960037, 1996, https://doi.org/10.4271/960037.Also In
References
- Hendricks, E. “Mean Value Modelling of Large Turbocharged Two-Stroke Diesel Engine SAE Technical Paper No. 890564 1989
- Hendricks, E. Sorenson, S. C. “Mean Value Modelling of Spark Ignition Engines” SAE Technical Paper No. 900616 1990
- Rasmussen, I. Emission fra Biler (Emission from Cars) The Laboratory for Energetics, The Technical University of Denmark Lyngby Denmark 1976
- Aquino, C. F. “Transient A/F Control Characteristics of the 5 Liter Central Fuel Injection Engine” SAE Technical Paper No. 810494 1981
- Dobner, D. J. “An Engine Model for Dynamic Engine Control Development” ASME PaperNo. WA4-11:15 1986
- Moskwa, J. J. Hedrick, J. K. “Automotive Engine Modeling for Real Time Control Applications” 1987 ACC, Paper No. WA 10- 11:00 1987
- Crossely, P. R. Cook, J. A. “A Nonlinear Engine Model for Drivetrain System Development” IEEE International Conference “Control 91”, Conference Publication No. 332 2 921 92 Edinburgh, U. K. March 1991
- Adida, J. Claude, D. “Spark Ignition Engines and Pollution Emission: New Approaches in Modelling and Control” Int. J. of Vehicle Design 15 3/4/5 1994
- Uchida, M. Miwa, H. Nagaishi, H. “A Single Point Injection System that Takes into Account Air Flow and Fuel Transportation” lMech E, Paper No. C394/027 1990
- Benninger, N. F. Plapp, G. “Requirements and Performance of Engine Management Systems Under Transient Conditions” SAE Technical Paper No. 910083 1991
- Achleitner, E. Werner, H,. Koch, A. Schürz “Electronic Engine Control System for Gasoline Engines for LEV and ULEV Standards” SAE Technical Paper No. 940479 1995
- Hendricks, E. Vesterholm, T. Sorenson, S. C. “Nonlinear, Closed Loop, Sl Engine Control Observers” SAE Technical Paper No. 920237 1992
- Nishiyama, R. Ohkubo, S. Washino, S. “An Analysis of Controlled Factors Improving Transient A/F Control Characteristics” SAE Technical Paper No. 890761 1989
- Sogawa, Y. Kameoka, T. Matsui, F. Int. Jour. of Vehicle Design 10 5 1989
- Grizzle, J. Cook, J. Milam, W. “Improved Cylinder Air Charge Estimation for Transient Air Fuel Ratio Control” Proc. 1994 American Control Conference (ACC), Paper No. TM I - 1:30 1994
- Cho, D. Hedrick, J. “Sliding Mode Fuel-Injection Controller: Its Advantages” Jour. of Dyn. Syst., Meas. and Control 113 Sept. 1991
- Kao, M. Moskwa, J. “Nonlinear Cylinder and Intake Manifold Pressure Observers for Engine Control and Diagnostics” SAE Technical Paper No. 940375 1994
- Morris, R. L. Powell, B., K. “Modem Control Applications in Idle Speed Control” Proc. of the 1983 American Control Conference (ACQ, Paper No. WA4-11:45 1983
- Kjergaard, L. Nielsen, S. Vesterholm, T. Hendricks, E. “Advanced Nonlinear Engine Idle Speed Control Systems” SAE Technical Paper No. 940974 1994
- Ghaya, S. Mudgett, D. R. “Modelling of Automotive Dynamics for Digital Control of Vehicle Platoons” Proc. 1994 American Control Conference (ACC, Paper No. WA I - 10:40 Baltimore MD, USA June 1994
- Kaidantzis, P. Rasmussen, P. Jensen, M. Vesterholm, T. Hendricks “Robust, Self-Calibrating Lambda Feedback for S1 Engines” SAE Technical Paper No. 930860 1993
- Vesterholm, T. Hendricks “Sl Engine Observers Realized Using Optimized Integration Algorithms” 12th IFAC World Congress on Automatic Control Sidney, Australia July 1993
- T aylor, C. F. The Internal Combustion Engine in Theory and Practice , 2. Edition 1 The M.I.T. Press Cambridge MA 1966
- Heywood, J. B. Internal Combustion Engine Fundamentals McGraw-Hill Book Co., Inc. NY NY 1989
- Ferguson, C. R. Internal Combustion Engines John Wiley &Sons, Inc. NY NY 1986
- Holmskov, J. A Control System for an Internal Combustion Engine Laboratory for Energetics, The Technical University of Denmark Sept. 1990
- Servati, H. DeLosh, R. G. “A Regression Model for Volumetric Efficiency” SAE Technical Paper No. 860328 1986
- Addy, A. L. Morris, M. J. Dutton, J. C. “An Investigation of Compressible Flow Characteristics of Butterfly Valves” Transactions of the ASME, Jour. of Fluids Engineering 107 Dec. 1985
- Hendricks, E. Chevalier, A. Jensen, M. Vesterholm, T. “Event Based Engine Control: Practical Problems and Solutions” SAE Technical Paper No. 950008 1995
- Hendricks, E. Vesterholm, T. Kaidantzis, P. Rasmussen, P. Jensen, M. “Nonlinear Transient Fuel Film Compensation” SAE Technical Paper No. 930767 1993
- Hall, W. Orn, E. “Flow of a Compressible Fluid Through a Sudden Enlargement in a Pipe” Prop. Inst. of Mech , Eng. 169 49 1955
- Hendricks, E. Jensen, M. Kaidantzis, P. Rasmussen, P. Vesterhohn, T. “Transient A/F Ratio Errors in Conventional SI Engine Controllers” SAE Technical Paper No. 930856 SP-955 1993
- Chen, J. L. Chen, G. “Throttle Body at Engine Idle: Tolerance Effect on Flow Rate” SAE Technical Paper No. 951057 1995