This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Hot Vibration Durability of Ceramic Preconverters
Annotation ability available
Sector:
Language:
English
Abstract
The advent of thermally durable catalyst technologies has created the opportunity to move catalytic converters closer to the engine, providing a potential solution for cold start emissions. Close-coupled positioning exposes the converter to higher exhaust gas temperatures than experienced in underbody applications, permitting earlier catalyst light-off. The proximity of the converter to the engine will result in increased exposure to the vibrational energy created by combustion processes as well as intake and exhaust valve dynamics.
This study investigated the thermo-mechanical challenges of mounting a ceramic substrate under severe conditions. In some instances ceramic substrates have been overlooked for application in the more demanding close-coupled environment. It will be shown that ceramic substrates mounted with standard intumescent mats survive under the most severe hot vibration testing conditions in the industry.
Hot vibration testing is a very expensive activity. Therefore, testing a statistically significant sample population is not cost effective. Additional testing techniques were employed in this study to quantify hot vibration performance. These tests show promise in predicting hot vibration durability.
Recommended Content
Technical Paper | Advances in Durability and Performance of Ceramic Preconverter Systems |
Technical Paper | Design Considerations for a Ceramic Preconverter System |
Authors
Topic
Citation
Locker, R., Schad, M., and Sawyer, C., "Hot Vibration Durability of Ceramic Preconverters," SAE Technical Paper 952414, 1995, https://doi.org/10.4271/952414.Also In
References
- Hu Z. Heck R.M. “High Temperature Ultra Stable Close-Coupled Catalysts,” SAE Paper No. 950254 February 1995
- Socha L.S., Jr. Gulati S.T. Locker R.J. Then P.M. Zink U. “Advances in Durability and Performance of Ceramic Preconverter Systems,” SAE Paper No. 950407 February 1995
- Day J.P. “The Design of a New Ceramic Catalyst Support,” SAE Paper No. 902167 February 1990
- Gulati S.T. Socha L.S., Jr. Then P.M. Stroom P.M. “Design Considerations for a Ceramic Preconverter System,” SAE Paper No. 940744 February 1994
- Gulati S.T. “New Developments in Catalytic Converter Durability,” Catalyst and Automotive Pollution Control II Crucq A. Elsevier Science Publishers B.V. Amsterdam 1991
- Gulati S.T. Socha L.S., Jr. Then P.M. “Design and Performance of a Ceramic Preconverter System,” CAPoC-3 April 1994
- Gulati S.T. Merry R.P. “Design Considerations for Mounting Material for Ceramic Wall-Flow Diesel Filters SAE Paper No. 840074 February 1984
- Stroom P.D. Merry R.P. Gulati S.T. “Systems Approach to Packaging Design for Automotive Catalytic Converters,” SAE Paper No. 900500 February 1990
- Gulati S.T. Ten Eyck J.D. Lebold A.R. “New Developments in Packaging of Ceramic Honeycomb Catalysts,” SAE Paper No. 922252 October 1992
- Gulati S.T. Ten Eyck J.D. Lebold A.R. “Durable Packaging Design for Cordierite Ceramic Catalysts for Motorcycle Applications,” SAE Paper No. 930161 March 1993