This content is not included in your SAE MOBILUS subscription, or you are not logged in.
A Crash Simulation of Instrument Panel Knee Bolster Using Hybrid III Dummy Lower Torso
ISSN: 0148-7191, e-ISSN: 2688-3627
Published February 01, 1995 by SAE International in United States
Annotation ability available
This paper reports the analytical procedure developed for a simulation of knee impact during a barrier crash using a hybrid III dummy lower torso. A finite element model of the instrument panel was generated. The dummy was seated in mid-seat position and was imparted an initial velocity so that the knee velocity at impact corresponded to the secondary impact velocity during a barrier crash. The procedure provided a reasonably accurate simulation of the dummy kinematics. This simulation can be used for understanding the knee bolster energy management system. The methodology developed has been used to simulate impact on knee for an occupant belted or unbelted in a frontal crash. The influence of the vehicle interior on both the dummy kinematics and the impact locations was incorporated into the model. No assumptions have been made for the knee impact locations, eliminating the need to assume knee velocity vectors. This procedure can also be used to obtain Tibia loading and ankle behavior (twist).
The results obtained from the simulation compared favorably with the barrier test data. With different initial velocity applied to the dummy, the procedure has been adapted to simulate sled tests. The procedure has been successfully used for the design and development of the instrument panel to meet Federal Motor Vehicle Safety Standard (FMVSS) 208 requirements.
CitationHumayun, S., Bapu, G., and Erasala, S., "A Crash Simulation of Instrument Panel Knee Bolster Using Hybrid III Dummy Lower Torso," SAE Technical Paper 951067, 1995, https://doi.org/10.4271/951067.
- Wawa Charles J., Chandra Jim S., Verma Mukul K., “Implementation and Validation of A Finite Element Approach to Simulate Occupant Crashes with Airbags: Part 1 - Airbag Model”, Proceedings of the 1993 ASME Winter Annual Meeting.
- Hallquist John, LS-DYNA3D Theoretical Manual, 1991.
- Federal Motor Vehicle Safety Standards (FMVSS) Manual, 1991.