This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Model-Based Engine Calibration for Best Fuel Efficiency
Annotation ability available
Sector:
Language:
English
Abstract
Today's engine management systems for SI engines consist of static and dynamic control algorithms. The static functions of the engine management guarantee the correct stationary operation of the engine in all the possible operating points. The static functions are contained mainly in two lookup tables, one for the spark advance and one for the metered depending on engine speed and load. Usually these lookup tables are determined with experiments on the engine test bench. In this paper, a model-based method for the evaluation of the fuel-optimal maps for spark advance and metered fuel is described.
The method can be divided into several steps:
-
1.
Measurement and identification of all the engine parameters in a reference point (including the pressure in one cylinder)
-
Calculation of the burn-through function (progress of the combustion)
-
Iterative calculation of the amount of residual exhaust gas
-
Approximation of the definitive burn-through function with the Vibe equation
-
-
2.
Optimisation of the specific engine work by simulation, varying spark advance and metered fuel (the change in the combustion is taken into account by varying the Vibe parameters according to Csallner's equations).
-
3.
Based on the engine parameter measurements of step 1, prediction of the parameters for a new operating point in the vicinity of the reference point using simulation only.
-
4.
Search for the optimal spark advance and metered fuel in the new operating point according to step 2
The method has been tested with a BMW M30 engine (3.4 liter 6-cylinder) on a dynamic test bench. The results show that very few experiments yield good starting values for the fuel-optimal calibration of the engine. They prepare the way for further optimisation work on the test bench which now can focus on a rather narrow region around the optimum.
Recommended Content
Authors
Topic
Citation
Onder, C. and Geering, H., "Model-Based Engine Calibration for Best Fuel Efficiency," SAE Technical Paper 950983, 1995, https://doi.org/10.4271/950983.Also In
References
- McBride B.J. et al. Thermodynamic Properties to 6000K for 210 Substances Involving the First 18 Elements Washington 1963
- Krieger R.B. Borman G.L. The Computation of Apparent Heat Release for Internal Combustion Engines ASME Paper 66-WA/DGP-4 1966
- Pischinger R. et al. 1989
- Vibe I.I. 1970
- Csallner P. 1981
- Woschni G. Csallner P. 1981
- Woschni G. Csallner P. 1981
- Onder Ch.H. 1993