This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
An Approach for Designing Out Surface Defects in Metal Stampings
Annotation ability available
Sector:
Language:
English
Abstract
Surface defects occur during forming, material unloading and during further material processing. During forming operations the compressive forming stresses are the cause of defects. During material unloading and further material processing, springback and residual stresses are the major cause of such defects.
The conditions for the occurrence of surface defects at these three stages are examined and discussed. A computer aided methodology is presented for estimation of the residual stresses, application of the approach is given for some practical examples.
Authors
Topic
Citation
Kolodziejski, J., Assempoor, A., and Liu, S., "An Approach for Designing Out Surface Defects in Metal Stampings," SAE Technical Paper 940750, 1994, https://doi.org/10.4271/940750.Also In
References
- Karima M. Tse W. “Process Signature - Product and Process Perspectives,” XVI Congress of IDDRG Borlaenge, Sweden 1990
- Sobis T. Engel U. Geiger M. “An Experimental Analysis of the Onset of Buckling in Sheet Metal Forming,” IDDRG Working Group Meeting Pisa, Italy 1991
- Van der Hoeven J.M. De Mare C. “Avoiding Surface Deflections on an Automobile Rear Fender,” IDDRG Working Group Meeting Pisa, Italy 1991
- Monfort G. Braggard A. “A Simple Modelisation of Shape Errors in Forming and its Application to the Reduction of Springback,” 12th Annual Automotive Materials Symposium Detroit 1985
- Kunitake K. et al. “Influence of Forming Condition and Panel Surface Stiffness on Shape Fixability and Surface Distortion,” XVI Congress of IDDRG, Borlaenge Sweden 1990
- Keeler S.P. Report to Automotive Applications Committee American Iron and Steel Institute 1989
- Yoshida K. et al “Analysis and Control of Buckling Behaviour due to Elastic Recovery in Press Forming,” XIII Congress of IDDRG Melbourne, Australia 1984
- Ingvarsson L. “Residual Stress Phenomena due to Cold-Bending of Steel,” XVI Congress of IDDRG Borlaenge, Sweden 1990
- Bhattacharyya D. Thorpe W.R. Painter M.J. “Residual Stress Prediction in Large Autobody Panels,” J. Material Shaping Technology 5 4 1988
- Timoshenko S. P. Goodier J.N. “Theory of Elasticity,” 3rd 433 441 McGraw-Hill, Kogakusha 1970
- Liu S.-D. Karima M. “A one Step finite element approach for product design of Sheet Metal Stampings,” NUMIFORM'92 497 502