This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Development of the Flame Detector for Space Station Freedom
Annotation ability available
Sector:
Language:
English
Abstract
One of the primary safety concerns for Space Station Freedom pressurized modules is fire. Some Freedom modules are unattended for long periods of time. In other cases, enclosed, pressurized volumes are not open to crew monitoring. As a result, a fire detection system is required to continuously monitor all modules for combustion.
This paper briefly reviews the overall design for the Freedom fire detection system, and the design of the two basic types of detectors: smoke and flame. The smoke detectors monitor particulates in small open areas, stand-offs, end-cones, and racks. The flame detectors survey open areas for radiation at wavelengths and intensities characteristic of combustion. Responses from detectors are evaluated by Freedom's data management system to determine the presence of combustion and to recommend appropriate action. The combination of discrete detectors and centralized processing produces a flexible fire detection system which can adapt to an evolving Space Station Freedom design or to other enclosed environments.
This paper then focuses on the design, development, and testing of the flame detector. The flame detector monitors for radiation in three specific ranges of the spectrum: in a narrow band in the ultraviolet, in the visible, and in a broad band in the infrared. The ultraviolet and infrared ranges are characteristic of combustion. The visible range provides a measure of the background and is used as a discriminator to minimize false alarms. The detector provides analog outputs which are functions of the total energy received in each of these ranges. The detector also monitors for flicker, another characteristic of combustion. The design and development of the flame detector are discussed in detail. Final data from the flame detector development test are presented and discussed.
Recommended Content
Authors
Topic
Citation
Fuhs, S., Hu, R., and McClure, G., "Development of the Flame Detector for Space Station Freedom," SAE Technical Paper 932106, 1993, https://doi.org/10.4271/932106.Also In
References
- Fuhs S. Hu R. McLin J. McClure G. Armstrong M. “Design of the Fire Detection System for Space Station Freedom,” International Conference on Life Support and Biospherics Huntsville, AL February 17, 1992
- Fuhs S. Buchmann O. Hu R. McLin J. Armstrong M. “Development of the Fire Detection System for Space Station Freedom,” Society of Automotive Engineers International Conference on Environmental Systems Seattle, WA July 13-16, 1992
- Sacksteder K. “Microgravity Combustion Fundamentals,” Spacecraft Fire Safety proceedings of a workshop held at NASA Lewis Research Center Cleveland, Ohio August 20-21, 1986
- Cole M.B. “Space Station Internal Environmental and Safety Concerns,” Spacecraft Fire Safety proceedings of a workshop held at NASA Lewis Research Center Cleveland, Ohio August 20-21, 1986
- Fire Detection and Fire Suppression Trade Study Space Station Phase B Study Environmental Control and Life Support System AlliedSignal Aerospace Systems & Equipment Document 85-22472 September 30 1985
- Bird R.B. Stewart W.E. Lightfoot E.N. Transport Phenomena John Wiley & Sons 1960
- System Design and Trade Study Space Station Freedom Work Package 01, Fire Detection Assembly AlliedSignal Aerospace Systems & Equipment Document 90-63506 March 9 1990
- Development Test Report, Space Station Freedom WP-01 Research Flame Detector for ECLSS FDA Subsystem AlliedSignal Aerospace Controls and Accessories Document 92-05760 November 16 1992