This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Designing Energy Absorbing Steering Wheels Through Finite Element Impact Simulation
ISSN: 0148-7191, e-ISSN: 2688-3627
Published August 01, 1993 by SAE International in United States
Annotation ability available
Light metal alloys based on magnesium and aluminum are increasingly being pursued for various vehicle interior applications because of distinct advantages such as weight savings and potential parts consolidation. One such application of light metal alloys is the steering wheel, which is an important component of a safety system that is comprised of the driver-side airbag, steering wheel, the steering column and its attachment bracketry to the instrument panel and the vehicle body structure. For the airbag to function effectively as a restraint during a frontal crash, the steering wheel has to provide adequate support. In addition to the steering column which is designed to absorb energy, the wheel can also function as an energy absorber if so designed. One way of achieving this energy absorption is through plastic deformation of the wheel. Adverse material characteristics, however, make the energy absorbing steering wheel design, using light metal alloys, a sizeable challenge. This is further aggravated by the various styling and packaging constraints imposed on a visible component of the vehicle such as the steering wheel.
In this study, an impact simulation methodology that guides the design of the steering wheels is demonstrated. The 15 mph body block impact on the steering wheel assembly (following the Federal Motor Vehicle Safety Standard 203 test) was simulated and used for the design evaluations. Nonlinear, transient finite elements were employed in this simulation to characterize the body block, the airbag module, the steering wheel and the steering column. Specialized and proprietary material models were utilized to simulate the die cast material behavior. Favorable comparison of the simulation results with test results demonstrates the usefulness of this simulation methodology in design. The study shows that steering wheels made of light metal alloys can be designed for energy absorption and compliance with other design requirements by using transient, nonlinear finite element methods.
CitationShyu, S., Mani, A., Krishnaswamy, P., Conroy, R. et al., "Designing Energy Absorbing Steering Wheels Through Finite Element Impact Simulation," SAE Technical Paper 931844, 1993, https://doi.org/10.4271/931844.
- Horsch J.D. Culver C.C. “The Role of Steering Wheel Structure in the Performance of Energy Absorbing Steering Systems,” SAE Technical Paper 831607 1983
- Kuarauchi T. “Application of rigid polyurethane foam to the energy-absorbing steering column,” Int. J. of Vehicle Design 8 2 1987
- Naab K.N. Stucki S.L. “Development and Testing of Steering Assembly Countermeasures for Driver Impacts,” SAE Technical Paper 900546 1990
- Kawase Y. Shinto H. Yoshida T. “Development of Magnesium Steering Wheel,” SAE Technical Paper 910549 1991
- Aune T. Kr. Albright D.L. Westengen Hakon “Properties of Die Cast Magnesium Alloys of Varying Aluminum Content,” SAE Technical Paper 900792 1990
- Federal Motor Vehicle Safety Standards (FMVSS) National Highway Traffic Safety Administration U.S. Department of Transportation Washington, D.C.
- SAE Recommended Practice, Steering Column System, Laboratory Test Procedures SAE J944 1980