This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
An Amine, Nitrite, Phosphate and Heavy Metal Free Engine Coolant Inhibitor
Annotation ability available
Sector:
Language:
English
Abstract
A new supplemental-coolant additive (SCA) has been developed suitable for heavy-duty diesel engines. The formulation stands apart from the commercially available SCAs in that, it is free of nitrite, phosphate, and all heavy metals. Its corrosion-inhibition performance in ASTM D-1384, ASTM-4340, and ASTM D-2570 have been measured. When compared to two commercially available SCAs, test results indicated better or equivalent protection for: copper, brass, low lead and silver solders, carbon steel, gray cast iron, cast aluminum and heat-rejecting aluminum surface. Its maximum hard-water stability at 480 ppm hardness and, its ability to prevent liner-pitting, as measured by the bench-top cavitation-erosion test (ASTM G32), were superior to the nitrite containing SCAs. Its scale inhibition and antifreeze compatibility was equivalent to the commercial SCAs.
Recommended Content
Technical Paper | Solder Protection with Extended Life, Carboxylate-Based Coolants |
Technical Paper | Monoacid/Diacid Combination as Corrosion Inhibitors in Antifreeze Formulations |
Technical Paper | Long Life Performance of Carboxylic Acid Based Coolants |
Authors
Citation
Sotoudeh, K., "An Amine, Nitrite, Phosphate and Heavy Metal Free Engine Coolant Inhibitor," SAE Technical Paper 930474, 1993, https://doi.org/10.4271/930474.Also In
References
- Finklea J.F. Nitrosamines in Cutting Fluids, Bulletin 15, NIOSH Current Intelligence Bulletin Reprints, U.S. Department of Health, Education, m and Welfare Office of Extramural Coordination and Special Projects Rockville, Maryland Publication Number 78-127 98 100 1978
- Frost Sullivan 212-233-1080 “Corrosion Inhibitors,” Marketing Reference of Inhibitors Used in 1989-1992
- Darden J.W. Triebel C.A. Maes J.P. Vanneste W. “Monoacid/Diacid Combination as Corrosion inhibitors in Antifreeze Formulations,” SAE Technical Paper Series 900804 , international Congress and Exposition Detroit, Michigan February 26 March 2 1990
- Ohkawa Satoshi Kawasaki Titose Kumagae Kenji “A New Antifreeze Coolant for Heavy-Duty Diesel Engines,” Worldwide Testing, SAE International, SP-800 35 1990
- Van Neste W.A. Maes J.P. Darden J.W. Triebel C.A. U.S. Patent 4 759 864 July 26 1988
- Vukasovich M.S. Sullivan F.J. Engine Coolant Testing: Second Symposium ASTM Special Technical Publication 887 86 April 1984
- Rowe L.C. Chance R.L. Material Performance 17 1983
- A.A. Aksut Saadet Uneri Chim. Acta Turc. 12 2 279-97 1984
- Farr J.P.G. Saremi M. Surface Technology 17 1 19 27 1982
- Gulley H.J. U.S. Patent #4 711 735 1987
- Samuels B.W. Sotoudeh K. Foley R.T. Corrosion 358 1981
- Lu Zhu Zhent Shizhong Zhu Yingchun Chen Peishi East China Institute of Chemical Engineering Huazue Shijie 23 9 262 4 1982
- Wrubl C. Mor E.D. British Corrosion Journal 18 3 142 1983
- Rowe L.C Chance R.L. Walker M.S. Material Performance 22 6 17 June 1983
- Vukosovich M.S. Sullivan F.J. Material Performance 22 8 25 33 1983
- lovchev J. British Corrosion Journal 18 3 148 1983
- General Motors Engineering Standards GM 6043-M, Automotive Engine Coolant Concentrate-Ethylene Glycol Type, p. J41-401 February 1983 Preprint UMC 63003 General Motor Corp. Detroit, Michigan
- Wong D. Swette L. Journal of Electrochemical Society 126 1 11 15 January 1979
- Butler G. Mercer A.D. British Corrosion Journal 12 171 1977
- Fiaud C. Netter P. Tadjamoli M. Tzinmann M. Engine Coolant Testing: Second Symposium ASTM Technical Publication 887 162 April 1984
- Rowe L.C. Chance R.L. Walker M.S. Material Performance 22 6 17 June 1983
- Rozenfel'd I.L. Verdiev S.Ch. Kyamzimov A.M. Bairomov A. Kh. Zaschita Mettallov 18 6 866 870 November-December 1982
- Desai M.M. Werkstoffe Korrosion 23 6 475 1972
- Tano Minoru Japan Kokai Patent 77 146 739 Dec. 1977
- Bates Roger G. Determination of pH Theory and Practice John Wiley and Sons 1964
- Hersch P. Hare J.B. Robertson A. Sutherland Sheila M. “An Experimental Survey of Rust Preventatives in Water. II. The screening of Organic Inhibitors,” Journal of Applied Chemistry 11 251 July 1971
- Issenberg P. “Nitrite, Nitrosamines and Cancer,” Fed. Proceed 35 1322 1976
- Wolf I.A. Wasserman A.E. “Nitrates, Nitrites, and Nitrosamines,” Science 177 15 1972
- Bolza F. “Internationalization of the Automotive Industry-Global Responses in the Functional Fluid Area,” Worldwide Trends in Engine Coolants, Cooling System Materials and Testing, SAE International, SP-811 1 1990
- General Motors Corporation “Coolant for Detroit Diesel Engines,” 7SE-298 August 1984
- Bregman J.I. “Corrosion Inhibitors,” Chapter 4 “Cooling Water, Other Systems,” The MacMillan Company New York Collier-MacMillan Limited London 1963
- Daignault L.G. Moore F.W. Antalek Gililland M.E. U.S. Patent 3,228,884 January 11 1966
- Walker M.S. Material Performance 29 July 1973
- Fivizzani K.P. Shim S.H. “Effects of Molybdate in Cooling Water Treatment Programs,” Cooling Tower Institute Journal 12 6 15 1991
- Department of Toxicology, Vet. Food Control Center, Mester 81 Budapest, Hungry “Secondary Copper Deficiency in Cattle Caused by Molybdenum Contamination of Fodder: A Case History,” Veterinary and Human Toxicology 31 1 29 33 1989
- Golfman L.S. Boila R.J. “Effects of Molybdenum and Sulfur on Minerals in the Digestive Tract of Steers,” Department of Animal Science, Canadian Journal Animal Science, 70 3 905 920 1990
- Anke M. Masaka T. Arnhold W. Krause U. Groppel B. Schwarz S. “The Influence of A Sulfur Molybdenum or Cadmium Exposure on the Trace Element Status of Cattle and Pigs,” Archives of Animal Nutrition 39 7 657 666 1989
- Klarschlammverorgnung 8 SR 814.225.23 April 1981
- Row L.C. “Automotive Engine Coolants: A Review of Their Requirements and Methods of Evaluation,” Engine Coolant Testing: State of the Art ASTM Special Technical Publication 705 Ailor W.H. Philadelphia 1979
- Wiggle R.R. Hospadaruk V. “Corrosion of Cast Aluminum Alloys Under Heat Transfer Conditions,” Society of Automotive Engineers Inc. 150 1982
- Wen Ta Tasi “Corrosion Inhibition of Aluminum Alloys in Heat Exchange Systems,” Surface and Coating Technology 31 365 1987
- Beard I.K. Jr. Cinville J.J. “A Demonstration of Aluminum Transport Deposition,” Engine Coolant Testing: Second Symposium, ASTM STP 887 Roy E. Beal American Society for Testing and Materials Philadelphia 1986 44 60
- Moriarty B.E. “Surface Studies of Corrosion Inhibitors in Cooling Water Systems Material Performance 68 Jan 1990
- Kinisky T.G. McKenzie D.A. “Investigation of Premature Water Pump Seal Failures,” Worldwide Trends in Engine Coolants, Cooling System Materials and Testing, SAE International, SP-811 159 1990
- Hercamp R.D. Hudgens R.D. “Cavitation Corrosion Bench Test for Engine Coolants,” SAE Technical Paper Series, 881269 September 1988
- Hudgens R.D. Carver D.P. Hercamp R.D. Lauterback “Refinement of the Vibratory Cavitation Erosion Test for the Screening of Diesel Cooling System Corrosion Inhibitors,” Engine Coolant Testing: State of the Art ASTM Special Technical Publication 705 Ailor W.H. Philadelphia 233 1979
- Mitchell W.A. “Statistical Treatment of Laboratory Data for ASTM D-1384-70 Using Soft Solder,” Engine Coolant Testing: State of the Art ASTM Special Technical Publication 705 Ailor W.H. Philadelphia 220 1979
- Mitchell W.A. “Statistical Treatment of Laboratory Data for ASTM D-1384-70 Using Soft Solder,” Engine Coolant Testing: State of the Art ASTM Special Technical Publication 705 Ailor W.H. Philadelphia 220 1979 1979
- Hudgens R.D. Hercamp R.D. “Test Methods For The Development of Supplemental Additives For Heavy-Duty Diesel Engine Coolants,” Engine Coolant Testing: Second Symposium, ASTM STP-887 Beal Roy E. American Society for Testing and Materials Philadelphia 1986 203
- Wiggle R.R. Hospadaruk V. “Corrosion of Cast Aluminum Alloys Under Heat Transfer Conditions,” Society of Automotive Engineers Inc. 150 1982
- Hudgens R.D. Carver D.P. Hercamp R.D. Lauterback “Refinement of the Vibratory Cavitation Erosion Test for the Screening of Diesel Cooling System Corrosion Inhibitors,” Engine Coolant Testing: State of the Art ASTM Special Technical Publication 705 Ailor W.H. Philadelphia 233 1979